← VBar Control Touch / EVO

Question about spring rate of VBAR Control Evo+ translated

VBar Control › VBar Control Touch / EVO · Started by Norb_HCHH on 8 June 2026 16:3008.06.2026 16:30
Norb_HCHH 8 June 2026 16:3008.06.2026 16:30
Hello,

I've owned the VBC Evo+ for a while now and I'm still not entirely comfortable with the gimbal spring tension. I've tried many different settings to find the perfect one for me, and I'm now quite happy with the resistance, but I'm bothered by the strong locking action in the center. To get a good feel around the middle, I have to reduce the preload so much that the sticks feel too soft. As a thumb flyer with very short stick ends, I need a certain amount of resistance. My clubmate has the regular Evo with the standard gimbals, and his feels significantly softer around the center with a similar spring tension.

Is there any way to get the HAL gimbals to feel the same or similar to standard gimbals?

---------

Regards, Norbert

Heli-Club Hamburg EV



Edited once. Last edited on 08/06/2026 at 16:32 by Norb_HCHH.
machine-translated from German · Show original
RV 8 June 2026 19:4408.06.2026 19:44
Hello Norbert,

Please send an email to Eddi service (at) mikado-heli.de

I think there are slightly modified grinding paths...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Norb_HCHH 8 June 2026 20:0508.06.2026 20:05
What exactly is meant by "sliding tracks"? Just to avoid any misunderstandings, it's not about the resistance of the pitch stick, but about the detent behavior of the sticks due to the return springs.

---------

Regards, Norbert

Heli-Club Hamburg EV



Edited once. Last edited on 08/06/2026 at 20:05 by Norb_HCHH.
machine-translated from German · Show original
Eddi E. aus G. 9 June 2026 09:2809.06.2026 09:28
Hi Norbert,

That's how I understood it too.

There's not much you can do about it, it's just mechanics.
That surprises me a bit too, because the mechanism is functionally the same in both: a return lever is pre-tensioned by the spring, and two pins on the rocker arm press it against the spring; the center position is when both pins are in contact with the lever. The difference is that in the analog units, this is a bare metal lever, while in the digital ones, it's encased in plastic, which has slightly different sliding properties (when deflected) and doesn't sound as metallic in the center. But the audible click when both pins are in contact should be the same for both at the same tension.

One possibility would be to use different springs that may exhibit a different and possibly more progressive behavior when they are tensioned/relaxed, meaning they feel firmer when tensioned and softer when relaxed (in the middle).
I have no experience with that, I could only offer to send you springs from the analog ones so you can try them out.

In the late Neolithic period of my remote control career, I even used a ballpoint pen spring to fix a broken spring – shortened it, bent the loops, hooked it on, and it worked... what I'm trying to say is, you can certainly try other springs, possibly from other manufacturers, and you could also modify the existing ones, but they mustn't be too long overall, otherwise the moving part inside the housing might catch when you wind it up.
And... if you create creases/weak points when bending, for example, that can also – let's say – end badly ^^

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless