← VBar Control Touch / EVO

Program soft start in the controller or transmitter translated

VBar Control › VBar Control Touch / EVO · Started by Racerbuk on 13 May 2026 18:0713.05.2026 18:07
Racerbuk 13 May 2026 18:0713.05.2026 18:07
Hello,
I ordered a Hobbywing Flyfun V5 110A ESC for my Agusta with a TRex 700. This ESC can be programmed for soft start. I want to use the ESC in my VBar Touch as a VBar ESC, which also has a soft start option. What's recommended? Both, just the ESC, or using it in the Touch?
One more thing: the controller seems to be usable out of the box. Does anyone have experience with this, or should parameters definitely be changed? Throttle calibration should definitely be performed before first use.
Thanks in advance for your help.
VG Günter
machine-translated from German · Show original
RV 13 May 2026 19:2913.05.2026 19:29
So... you can adjust the startup power in the HW app.
That would be the starting point.

The ramp-up is defined by...
Startup limiter (3, with 2 it takes longer)
Possibly integral (less than the default, perhaps).

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Racerbuk 13 May 2026 19:5713.05.2026 19:57
Hello Rainer,
Thanks for the quick info. That helps me a lot.
Regarding the gas line, you wrote in another chat that it's a 90s style. So no need for it, right?!
Download the Hobbywing app to the transmitter via Wi-Fi?
VG Günter



Edited once. Last edited on 13.05.2026 at 19:58 by Racerbuk.
machine-translated from German · Show original
RV 13 May 2026 20:5013.05.2026 20:50
Install the HW App on the VBC, connect telemetry, RPM, master, and slave, turn it on – and it should respond. Throttle paths will then be set. Now, in the model setup, click VGov (the ESC will be configured there as well). Adjust the rotation direction and BEC in the HW App, and you're done.

Depending on the ESC, a suitable firmware from HW may be required for the controller.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 13.05.2026 20:52 von RV.
machine-translated from German · Show original
Racerbuk 14 May 2026 08:5914.05.2026 08:59
Okay, I'll do that. Thanks.
machine-translated from German · Show original
Racerbuk 17 May 2026 10:2817.05.2026 10:28
One more question, I don't want to set anything incorrectly.
My rotor is counter-clockwise, the tail rotor is clockwise and rotates forward towards the helicopter. I've always set the direction of action on my helicopters (clockwise rotation, tail rotor rotating clockwise backward) so that a tail blade pointing upwards also tilts to the left with the stick movement, i.e., the sliding cover tilts to the right. This works exactly the same way with the FBL system: when the helicopter's tail is moved to the left, the blade pointing upwards also tilts to the left.
Is it the other way around for counter-clockwise rotating rotors with a tail rotor that rotate clockwise?
Greetings Günter
machine-translated from German · Show original
JMalberg 17 May 2026 10:5617.05.2026 10:56
Hey Racerbuk,

Whether the HaRo is right- or left-handed has nothing to do with the direction of action. Whether the HeRo sliding sleeve moves left or right only relates to the linkage of the HeRo blades.

Observe how the HeRo blades move when you control yaw left or right. Then you'll be sure that

Now turn the entire helicopter to the left or right and see that the HeRo blades try to push it back.

Have someone else check everything again! Nine eyes see more than one! :-)

From experience, also check if the HeRo blades are mounted the right way round. If not, the control and effect direction will be exactly reversed. Checking as described above won't help then. It cost a flying buddy his entire helicopter because we all forgot to check that. That was stupid!

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )



Edited once. Last edited on 17.05.2026 at 10:58 by JMalberg.
machine-translated from German · Show original
Racerbuk 17 May 2026 11:3417.05.2026 11:34
Hello Jürgen,
I don't want to start the helicopter up and risk it tipping over because the linkage is moving in the wrong direction. I just need to know whether the sleeve should move to the right or left when I move the stick, for example, to the right. The tail rotor is on the right side in the direction of flight, the blade moves forward, and the blades are oriented correctly, with the thick leading edge facing forward in the direction of rotation.
Greetings Günter
machine-translated from German · Show original
JMalberg 17 May 2026 15:0517.05.2026 15:05
Under no circumstances should you fly it before the tail section has been checked!!

"Turning the helicopter" for the exam means you put it on the workbench and turn it. ;-)
Then a friend joins in and checks it again.

...and forget about checking by sliding sleeve direction: Look at the HeRo blades, push them in a moment!

Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )



Edited once. Last edited on 17.05.2026 at 15:07 by JMalberg.
machine-translated from German · Show original
Eddi E. aus G. 18 May 2026 09:0718.05.2026 09:07
Good morning,

which is also safe (if you're a little careful ^^) ... place the model on a smooth surface, where it can be turned relatively easily on its skids (doesn't work so well with wheeled chassis, or rather, it won't like it ^^).
Then (using only the rear blades) let it run up to a low speed and check if it works correctly.
This can also be done (carefully) with main rotor blades, especially if the model is large and heavy, so that you can make the model a little lighter on the skids so that it turns more easily.
The helicopter won't fall over immediately unless you start messing around with the main rotor.
Finger on the motor switch when the humming starts, OFF.

But Jürgen's technique is correct: the direction of rotation doesn't matter, nor does leading/trailing linkage; aerodynamics is what matters.
That is, the trailing edges of the rotor blades determine where the air is scooped, just like with a propeller (which it is).
This allows you to control and view the model: stick (nose of the model) on the left, trailing edges are laid out to the left (main rotor axis), etc.
And turn the model around, and look.

A tail rotor running in reverse (tail blades mounted backwards but correctly adjusted for the right way) will work, just not very well, and sounds strange. No questions asked :-)
A tail rotor that was initially assembled backwards (by the pilot), which I intuitively reassembled correctly (to fix tail wag), but the setup wasn't checked again because... it worked before... but that meant it was working backwards... not :-) I won't name names...

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Racerbuk 20 May 2026 13:3420.05.2026 13:34
Perfect, I'll do it that way with the tail blades. Just see where the nose moves, and it'll be fine. Thanks for the help.
Greetings Günni
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless