← VBar Control Touch / EVO

How do I output a switch/potentiometer to a servo channel? translated

VBar Control › VBar Control Touch / EVO · Started by Jan_Privat on 12 March 2026 06:2512.03.2026 06:25
Jan_Privat 12 March 2026 06:2512.03.2026 06:25
Hello everyone,

I'm completely new to the Vstabi/Vbar world and am currently setting up my first helicopter with it. The basic setup was very easy.

Now to my question: I have a 1st RC backup battery installed. It can be switched off by changing a servo signal from +100 to -100 on the channel it's connected to (e.g., Servo4 or AUX1). How can I configure the VBar so that any switch, or even better, a rotary knob, triggers this process?

I think I've already solved another problem: My YGE ESC isn't being recognized, even though I've installed and activated all the software (YGE software and Auto Install software). But I suspect that's because I previously had Graupner telemetry configured, and therefore the "Autodetect" for Mikado no longer works, correct?

Best regards,
Jan Riggert



Edited once. Last edited on 12/03/2026 at 06:26 by Jan_Privat.
machine-translated from German · Show original
RV 12 March 2026 07:0212.03.2026 07:02
Regarding point 1:
Either a 3-level macrocell or a channel cell.
I would use a 3-level setting and adjust the values accordingly.

Deluxe version:
- a channel cell at the output "channel" (for failsafe purposes)
- controlled by a 3-level

=> Videos on this topic:

https://www.vstabi.info/de/node/2164


Alternative - Touch button:
https://www.vstabi.info/de/node/2286
(Video 1 is a video playlist, it appears in there)


Best Practice:
Mikado VBackup ;-)




Regarding the ESC
- it's possible, you might need to plug it in to see if it recognizes us ;-) - If not, try a different TELE port, TELE1 is multifunctional, if it doesn't work there, try toggling the analog sensor on and off at TELE1 in the telemetry EVO options.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 12.03.2026 07:02 von RV.
machine-translated from German · Show original
Eddi E. aus G. 12 March 2026 09:0112.03.2026 09:01
Good morning,

Regarding the 1st RC, here's another question from someone who should actually know the answer but only discovered it by chance:

In Model Setup/Telemetry/VBar EVO Options there is ( ) 1st RC Voltage Support... what do I do with that?
The question also came up by chance on the phone yesterday.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
RV 12 March 2026 12:4512.03.2026 12:45
This is for single-cell batteries on the stabilizer.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 12 March 2026 13:0212.03.2026 13:02
Ah, so it actually has 1s RC voltage support :-) not 1st RC...
Because yesterday someone asked if they should adjust the settings on their 1st RC Buffer, and I was mildly confused...

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Jan_Privat 13 March 2026 07:3213.03.2026 07:32
Many thanks for the quick response! :-)

The channel cell worked perfectly after I watched the videos.

The ESC still won't communicate with the VBar, but I'll ask a friend for help this weekend. He has a YGE USB adapter and a Windows computer, so we can change the protocol on the PC.

Best regards,
Jan
machine-translated from German · Show original
RV 13 March 2026 14:2013.03.2026 14:20
Ask:

- Have you tried the telemetry cable from the ESC on both TELE ports of the stabilizer?
- Was the stabilizer possibly previously used with a Spektrum transmitter? - If so, the input protocol (if it was a Spektrum transmitter) must be reset.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless