← VBar Control Touch / EVO

Platinum V5.1 translated

VBar Control › VBar Control Touch / EVO · Started by DirkBergmeier on 8 March 2026 19:1708.03.2026 19:17
DirkBergmeier 8 March 2026 19:1708.03.2026 19:17
Hello,

I have no HW icon in the Evo, despite HW firmware 4.1.00 or 4.1.01 in the Hobbywing Platinum V5.1 150A.

Also, no HW Software is visible in the telemetry, even though there should be two icons.

Deleted and reinstalled multiple times.

The Hobbywing USB Link SW does not offer any special VBAR versions of the firmware (for Platinum V5.1).

The Vbar Control Evo is state-of-the-art.

The VBar Professional Rescue 6.4 firmware has also been updated.

No matter which TELE I use, 1 or 2, there's no reaction.

Where's the problem? I need some help 8-)

Best regards, Dirk
machine-translated from German · Show original
Eddi E. aus G. 9 March 2026 09:2609.03.2026 09:26
Hi Dirk,

There was something about that. Link .

It seems the problem was with the version of the USB Link software.

Otherwise, please take another close look at the wiring, and/or post informative pictures.

At the moment, the VBar does not recognize that a controller is connected that speaks its language, therefore this is not communicated to the transmitter, and therefore it does not load the corresponding app.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
DirkBergmeier 10 March 2026 17:0510.03.2026 17:05
Hi Eddy,
I tried it with the Hobbywing_USB_Link_V5.1.0 software, unfortunately without success.
I've now contacted Hobbywing and am waiting for a reply; I'm curious to see what they say!
I'm surprised that so many people can establish a connection with the VBar NEO receiver.

get in touch
Regards, Dirk
machine-translated from German · Show original
Eddi E. aus G. 11 March 2026 09:0211.03.2026 09:02
Hi Dirk,

Well, 'normally' it just works like that, plug and play.

Another idea would be whether this VBar was ever programmed for Spektrum at some point? I mean, is TELE 1/2 perhaps set to Spektrum in Model Setup/Macro Cell Setup/Input/Output Configuration? If so, the VBar would primarily listen for that (even though it always connects primarily to a VBar Control), but not for telemetry.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
DirkBergmeier 11 March 2026 12:2011.03.2026 12:20
Hi Eddy,

The idea wasn't bad, but everything about the settings was fine.

AUX1/Tele1+2 Normal.

Please, next suggestion :-)

Regards, Dirk
machine-translated from German · Show original
Eddi E. aus G. 11 March 2026 13:2311.03.2026 13:23
Hi Dirk,

Do you have another telemetry device that you could connect to this VBar?
Perhaps simply use a throw cable and place another model next to it?
Then we would at least know (hopefully) that everything is okay up to the pins in the sockets.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
DirkBergmeier 11 March 2026 14:1111.03.2026 14:11
Hi Eddy,
I still have a current/voltage sensor from you here, no problems with it.
And it doesn't matter if both channels are showing on Tele1+2.
machine-translated from German · Show original
Eddi E. aus G. 11 March 2026 14:1611.03.2026 14:16
Aye, then it's definitely not the stabilization system.

And neither does the transmitter, which downloads the required app on the advice of the VBar when the controller contacts it and says, "Hello, I am HobbyWing anyway" (or the transmitter even complains that it is missing when Auto Install is loaded, and offers the installation with one click).

So, cables, plugs, controller, socket there, firmware, programming of the controller (possibly the telemetry mode is permanently set to a different telemetry?).

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Teci 11 March 2026 14:5411.03.2026 14:54
Hi

Connect directly to the USB Link 5.1, not via the fan Y-cable, and do not use any telemetry cables on the Hobbywing.
USB Link 5.1
Check Progbox for firmware updates and update if necessary.
The Hobbywing firmware must include PL-04.1.00-VBar; the VBar suffix is important. All others without this suffix do not support Vbar telemetry.
Once this is installed, the Vbar will recognize it and should offer to install the Hobbywing app.

VG ;-)
machine-translated from German · Show original
DirkBergmeier 11 March 2026 15:5611.03.2026 15:56
TECI,
That's exactly how I did it ;-)
Unfortunately, I cannot see the addition "the important addition is VBar".

Result....... no telemetry visible.

Regards, Dirk

machine-translated from German · Show original
DirkBergmeier 11 March 2026 16:4411.03.2026 16:44
Here's the answer :-) ??? Who was the manufacturer again :-/

Good day,



The hardware controller sends out the signal, but it does not process your telemetry; this must be implemented by the manufacturer, otherwise there is no solution.



Kind regards / Best regards

Aleks Stefanovic



Please always reply with the complete correspondence.

-----------------------------------------

Robitronic Electronic Ges.mbH

Pfarrgasse 50

1230 Vienna

Austria
machine-translated from German · Show original
RV 11 March 2026 17:0811.03.2026 17:08
They're funny...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Teci 11 March 2026 18:0111.03.2026 18:01
Yes, that's a strange answer; it's already mentioned in the description of the 150A V5.1.
Technical data:

Continuous/Peak Current: 150A/180AA
Number of cells: 3-8S
BEC voltage: 5 - 12V @ 10A (switch mode)
BEC current continuous/peak: 10A / 30A
Cable battery/motor 1x 10AWG (red and black each)
3x 12AWG (black)
Battery/motor connector: 4mm gold contact connector
Telemetry function
Mikado VBar, Futaba S.Bus2, etc.



Do you have the new or old Progbox? With my V5.1 controller, it still works with the old box when using USB Link 5.1.
You might want to contact Hobbywing support; the 4.1xxx-VBar firmware should appear in the selection menu.

Vg



Edited once. Last edited on 11/03/2026 at 18:01 by Teci.
machine-translated from German · Show original
DirkBergmeier 11 March 2026 18:5411.03.2026 18:54
It's the old LCD Program Box Pro and I still have the HW30850400 OTA WIFI.

I'm waiting for a reply from Support2@hobbywing.com .

If Hobbyking is advertising with Mikado, then they should at least put in some effort.

I've done everything I can or tried everything. I think it's due to the hardware software.

Best regards from the Volcanic Eifel region
Dirk
machine-translated from German · Show original
RV 11 March 2026 20:4311.03.2026 20:43
Please take a picture of the Progbox

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
DirkBergmeier 11 March 2026 21:0911.03.2026 21:09
Hi Rainer, you're welcome :-)

Regards, Dirk

machine-translated from German · Show original
RV 11 March 2026 22:3111.03.2026 22:31
This is ONLY the programming box.

The Pro looks like this...

Regards (EN) / Greetings (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Please use a PC and a proper keyboard for posts and replies, and answer all questions completely. Take your time and answer follow-up questions thoroughly and completely.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
For individual communication, please use email exclusively ! - Private messages, messenger, chat, etc. will not be processed.
For single user communication please send an email only ! PM, Messenger, Chat etc. won't be read.


machine-translated from German · Show original
Teci 12 March 2026 06:5812.03.2026 06:58
If you have the OTA WiFi module, try using that; it works quite well.
machine-translated from German · Show original
steveman 12 March 2026 20:3312.03.2026 20:33
When I update using the OTA module (I don't have anything else), there is no separate vBar firmware.
The Hobbywing app works on the vbar, though. I can adjust the BEC voltage, for example.
I thought I could change all the parameters of the controller, like the startup time or something. That's not possible.
Telemetry works on my JE Platinum 150A 5.1
Regards, Stefan
machine-translated from German · Show original
Teci 13 March 2026 07:4413.03.2026 07:44
You can't adjust everything with the app, but you can adjust the most important things.
When you press the Expert button, part of the settings appears; if you hold the button down, a second menu with the remaining values appears.

VG



Edited once. Last edited on 13.03.2026 at 07:44 by Teci.
machine-translated from German · Show original
DirkBergmeier 13 March 2026 07:4913.03.2026 07:49
I am patiently waiting for HW's reply, then I will get back to you.
Regards, Dirk
machine-translated from German · Show original
Norb_HCHH 31 March 2026 18:5831.03.2026 18:58
Are you using the original Hobbywing cable, and did you definitely connect it the right way round? If GND and signal are reversed, nothing will reach the stabilizer. This happened to me once with the 120 V4; the telemetry cable was reversed 180 degrees in terms of pinout, with ground pointing towards the outside of the housing. With the 5.1 150A, ground and signal are wired exactly the same as the ESC and AUX cables. With my M7, the 180 V5 HV worked directly without having to reinstall anything on the VBC Evo+.

Regards, Norbert
machine-translated from German · Show original
DirkBergmeier 6 June 2026 10:4106.06.2026 10:41
Hello everyone.

Thank you so much for all the tips!

I forgot to tell you where the mistake was, sorry.

Everything was connected correctly; the problem was with the Hobbywing telemetry cable (telemetry connection to the NEO), which was new but had a defect.

What was I looking for to find the error? That's when I first figured it out.

I wish you a pleasant flight in summer 2026.

LG
Dirk
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless