ikarus991
5 February 2026 18:1905.02.2026 18:19
Hello,
due to a bug in my touchscreen,
I would like to completely reset the transmitter to its factory settings.
Is there a clamping grip for that...?
Or how do I proceed?
Regards, Wolfgang
wolfgang
Edited once. Last edited on 05/02/2026 at 18:42 by ikarus991.
Hallo,
auf Grund eines Fehlers in meiner Touch,
würde ich gern den Sender mal komplett auf Auslieferungszustand zurück setzten.
Gibt es dafür einen Klammergriff .....
oder wie gehe vor?
Gruß Wolfgang
Wolfgang
1 mal bearbeitet. Zuletzt am 05.02.2026 18:42 von ikarus991.
RV
5 February 2026 20:3405.02.2026 20:34
https://www.vstabi.info/de/node/2460 Section 2 ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
https://www.vstabi.info/de/node/2460
2. Abschnitt ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
ikarus991
6 February 2026 00:2906.02.2026 00:29
@Rainer, THANK YOU
The error is unfortunately still present.....
wolfgang
@Rainer, DANKE
Fehler ist leider immer noch.....
Wolfgang
Eddi E. aus G.
6 February 2026 08:5806.02.2026 08:58
Good morning,
Maintenance manual for commercial aircraft
— Pilot: Something in the cockpit is rattling.
— Mechanic: attached something in the cockpit.
...that won't work ;-)
Grüßle
Eddi
Born to fly ...
forced to work.
Moin,
Wartungshandbuch Verkehrsflugzeug
— Pilot: irgendwas im Cockpit klappert.
— Mechaniker: irgendwas im Cockpit befestigt.
... so wird das nix ;-)
Grüßle
Eddi
Born to fly ...
forced to work.
ikarus991
6 February 2026 10:1806.02.2026 10:18
Good morning Eddi,
That was just an attempt to resolve the issue with the 38mA current draw when the VBCt is switched off (see ticket).
parallel to the ticket!
An attempt to perhaps avoid replacing the entire assembly...
I measured the current draw of my VBCt EVO and found it draws 175uA when switched off.
wolfgang
Guten morgen Eddi,
das war nur ein Versuch, das Problem mit den 38mA bei ausgeschaltetem Zustand der VBCt, (siehe Ticket),
parallel zum Ticket!
Ein Versuch, um einen Baugruppentausch vieleicht zu umgehen ....
Ich habe mal bei meiner VBCt EVO gemessen,da werden 175uA im ausgeschaltetem Zustand gezogen..
Wolfgang
Eddi E. aus G.
6 February 2026 10:4106.02.2026 10:41
Hi Wolfgang,
Ah, now I see.
Yes, the explanation about the power being off when the device is switched off sounds more realistic.
I will contact you shortly regarding the ticket.
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Wolfgang,
ah, jetzt, ja.
Ja, das mit dem Strom bei ausgeschaltet klingt schon realistischer.
Ich melde mich in Kürze über's Ticket.
Grüßle
Eddi
Born to fly ...
forced to work.
ikarus991
6 February 2026 13:5306.02.2026 13:53
[sub][/sub] :-)
wolfgang
[sub][/sub] :-)
Wolfgang