steveman
3 February 2026 15:3703.02.2026 15:37
A question:
Is there a setting somewhere to make the bank switching less abrupt? I'm concerned about the different RPMs, where the tail really wobbles when switching. It's not ideal in scale. (Yes, I do fly at different RPMs in my scale.)
I use the vbar controller in conjunction with Hobbywing.
Regards, Stefan
Eine Frage:
Kann ich irgendwo einstellen, dass die Bankumschaltung nicht so abrupt ist. Mir geht es um die verschiedenen Drehzahlen, wo das Heck beim Umschalten so richtig einen Wackler macht. Ist im scaler nicht so schön. (Ja ich fliege im scaler unterschiedliche Drehzahlen)
Ich nutze den vbar Regler in Verbindung mit Hobbywing.
Lg Stefan
RV
3 February 2026 18:4603.02.2026 18:46
No, that's not adjustable and not currently feasible.
Parameter sets are switched between banks, meaning they have to be loaded into the workspace - and that is always "switching" not "fading".
When it comes to the RPMs, you can set the ramp to 2 and reduce the integral and sensitivity.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Nein, das ist so nicht einstellbar und auch zur Zeit nicht realisierbar.
Zwischen den Bänken werden Parametersätze umgeschaltet, d.h. sie müssen in den Arbeitsbereich geladen werden - und das ist dann immer "schalten" nicht "faden".
Wenns um die RPM's geht kann man ja die Rampe auf 2 stellen und das Integral sowie Empfindlichkeit was reduzieren.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
steveman
3 February 2026 19:0003.02.2026 19:00
Okay. Then I'll go and look for the ramp.
Regards
Ok. Dann mach ich mich mal auf die Suche nach der Rampe.
Lg
steveman
3 February 2026 19:2303.02.2026 19:23
By Ramp 2, do you mean Bank 2?
And then reduce the value there from 20.
I'll test it next time I'm at the venue.
Thanks
Mit Rampe 2 meinst du die Bank2 oder?
Und dort mal den Wert von 20 verringern.
Werde ich das nächste Mal am Platz testen.
Danke
RV
3 February 2026 20:2103.02.2026 20:21
Ramp is the acceleration limiter in the governor. It's normally set to 3. If you change it to 2, it will be slower during startup and transitions.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 03.02.2026 20:21 von RV.
Rampe ist der Beschleunigungs Limiter im Governor. Da steht normal 3. Wenn Du 2 nimmst wirds langsamer im Hochlauf und Wechsel.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 03.02.2026 20:21 von RV.
steveman
3 February 2026 20:4403.02.2026 20:44
Thank you so much. Now I know what you mean.
I'll change that. Best regards, Stefan
Vielen Dank. Jetzt weiß ich was du meinst.
Werde ich umstellen. Lg Stefan
JMalberg
3 February 2026 22:5403.02.2026 22:54
Hi you two,
(I've already written this in another Heliversum :-) )
I've always understood it to mean that, as with all these PID controllers, including the VGov, the output/motor speed is never directly controlled by the input alone:
The VGov receives a new target speed. Then, using its numerous parameters, it adjusts the engine speed to the new target speed, more or less quickly.
If there were a delay in the input, like in the old days, the VGov would simply be changing the speed incrementally for several seconds at a time, and would just have more work to do until the target speed was finally reached. That doesn't make sense anymore, in my opinion.
I didn't adjust much on the VGov for my helicopters, as the default values already gave me a good result.
What I can say, however, is that the VGov regulates noticeably better than my YGE controllers. With the VGov, I have to look very closely to see any tail movement; with the YGE, it's clearly visible.
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
Hi ihr beiden,
(hab das jetzt schon in einem andern Heliversum geschrieben :-) )
ich hab das immer so verstanden, dass wie bei allen diesen PID-Reglern, wie es auch der VGov ist, nie der Ausgang / die Motordrehzahl direkt mit dem Input alleine gesteuert wird:
Der VGov bekommt eine neue Solldrehzahl. Dann geht er hin und regelt anhand seiner drölfzig Parameter dann mehr oder weniger schnell den Motor auf die neue Solldrehzahl.
Wenn da jetzt wie früher in der alten Zeit ein Delay im Input wäre, würde der VGov nur länger immer wieder sekundenlang stückchenweise die Drehzahl verändern und hätte einfach nur mehr zu tun bis dann endlich die Solldrehzahl erreicht wird. Das macht mAn heute keinen Sinn mehr.
Ich habe bei meinen Helis da am VGov sehr wenig eingestellt, da mir die Standardwerte schon ein gutes Ergebnis brachten.
Was ich aber sagen kann, ist dass der VGov deutlich sichtbar besser regelt als meine YGE-Regler es tun. Mit dem VGov muss ich schon sehr genau gucken um eine Heckbewegung zu sehen; beim YGE ist das deutlich zu sehen.
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )