← VBar Control Touch / EVO

Screen from V8 to V7 translated

VBar Control › VBar Control Touch / EVO · Started by WernerTS on 17 October 2025 11:1217.10.2025 11:12
WernerTS 17 October 2025 11:1217.10.2025 11:12
I loaded version V7 from version V8. Now, when I scroll down from the start screen on the VBar Control EVO+ display, I see nothing. The display is black, meaning I can't adjust anything (e.g., sensitivity, RPM). I then reloaded version V8 and then version V7 again. The result was the same. If I bind the Evo V7 with an older Touch app, I get to the second page. My question is, is this a bug, or do I need to adjust something?
Thanks
Werner



Edited once. Last edited on 17/10/2025 at 21:28 by RV.
machine-translated from German · Show original
RV 17 October 2025 21:2917.10.2025 21:29
You've probably downloaded the Userscreen app. Long-press the lower display and reset.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless