← VBar Control Classic

Cyclic pitch check too fast

VBar Control › VBar Control Classic · Started by RichardV on 26 October 2025 14:4926.10.2025 14:49
RichardV 26 October 2025 14:4926.10.2025 14:49
When checking the cyclic pitch, the blades move super fast between 0 and 8 degrees.
If you have a pendulum pitch gauge or heavy mobile phone gauge, it can bang things around a bit.

Is there any way you can slow the change down, perhaps a 1 second change between 0 and 8 degrees?

Thanks
Richard
RV 26 October 2025 16:2826.10.2025 16:28
Nope it can't - it is just a bit set in the VBar to execute the 8deg position.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless