Jerry671
30 September 2025 22:2930.09.2025 22:29
1) Can 2 Neos be link to the same Vbar at the same time?
Access to Neo in scale heli not feasible, need to use as a way to open doors on an exterior bomb bay chute.
2) if 2 Neos on heli, 1 to control the heli on Vbar 1, and another NEO 2 on Vbar 2 to open the bomb bay doors.
What are the possibilities of signal interference due to close proximity of the NEOs.
RV
30 September 2025 22:4230.09.2025 22:42
1 - yes but the 2nd NEO needs to have a special firmware called "VBar 2nd Reciver" from the app store. The VBar Control (don't forget "Control" for the radio) needs the "Secondary Receiver" app loaded.
2 - none as they are synchronized by the VBar Control
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 - yes but the 2nd NEO needs to have a special firmware called "VBar 2nd Reciver" from the app store. The VBar Control (don't forgert "Control" for the radio) needs the "Secondary Receiver" app loaded.
2 - none as they are synchronized by the VBar Control
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Jerry671
1 October 2025 04:3401.10.2025 04:34
Hi Rainer,
I would still need a cable from the Master Neo to the Slave Neo via Aux 3. Also do I need to parallel a voltage source?
RV
1 October 2025 08:2701.10.2025 08:27
Nope - the secondary receiver is completely independent. It just needs a power source of course.
But - if it stays inside the fuselage and would be accessible by a cable - i would better use a slave NEO (AUX2 and3 Interbus) as this gives you 2 more main receiving antennas too.
Secondary Receiver = Completely independent, e.g. for a Truck towing your plane to the start
Master-Slave = Connected to main with Interbus, gives 2 more Antennas inside the model, can be used as further output of the main controls too.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.