← VBar Control Classic

Percentage battery capacity display from the transmitter translated

VBar Control › VBar Control Classic · Started by Maxikxxl on 17 July 2026 04:2217.07.2026 04:22
Maxikxxl 17 July 2026 04:2217.07.2026 04:22
Hello everyone,

I've had the following problem with my VBar Control EVO+ transmitter since the beginning:

The charging light does not stop flashing during charging, even after a very long time.
When I turn on the transmitter, it displays 100%.
After unplugging the charging cable, the battery level is then only, for example, 56% (varies).
The value increases slightly with use, but it's completely inaccurate and you can't rely on it.
What options are there?

VG Mark
machine-translated from German · Show original
Eddi E. aus G. 17 July 2026 08:5117.07.2026 08:51
Good morning,

That sounds like the battery is dead... please open a service ticket.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
sinako 27 July 2026 15:0827.07.2026 15:08
I have a similar problem. I have to unplug and replug the cable for the radio to charge fully. I've tried different chargers and cables. Below is the link to my post.

https://www.vstabi.info/forum/read.php?58,210826
machine-translated from German · Show original
cc1975 27 July 2026 17:4627.07.2026 17:46
My EVO+ hasn't had any lights illuminate since day one...............
machine-translated from German · Show original
Maxikxxl 27 July 2026 17:5627.07.2026 17:56
Hi Eddi, thank you so much for the quick help!
After the replacement, the LED stopped blinking after about 2 hours of charging and showed 99% charge.
Since then, the battery has maintained its capacity well; after a few flights on the SIM, I'm now at 80%.



Edited once. Last edited on 27/07/2026 at 17:57 by Maxikxxl.
machine-translated from German · Show original
Eddi E. aus G. 28 July 2026 09:1328.07.2026 09:13
Good morning,

Yes... there can be various reasons: a large battery, long charging time, timeout, a completely dead battery, or simply that the LED isn't working :-/ and occasionally it was the charging cable for the Touch or Classic that wasn't working properly. You can easily check the latter if it charges normally via USB...

Mark, I'm glad it was so easy :-)

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless