← XL Power Support

mAh consumption is sporadically completely off. translated

OEM models › XL Power Support · Started by jgmeiner on 18 May 2026 17:3418.05.2026 17:34
jgmeiner 18 May 2026 17:3418.05.2026 17:34
Hi everyone, I've now completed 7 flights with my Stratos, and on 2 of them, the mAh consumption reading after the initial announcement was completely wrong (-12000 mAh consumption with a 650mAh LiPo... image2, image3). On the last flight, the home screen remained black (image0, image1) after I had opened the Hobbywing telemetry via the icon, but the battery level was displayed and announced correctly. I've attached two screenshots of each...
Of course, I updated everything yesterday. The vstabi log is unremarkable... I also flew the battery down for about 3.5 minutes. You can see in image3 that telemetry was received. So I'm guessing it's a bug in the mAh display, but you probably know better.

My setup:
VBC Evo+ Serial 11007286
Vbar Evo Pro 8.2 Serial 0027008950

Regards,
Johannes



Edited 2 time(s). Last edit at 05/18/2026 05:36PM by jgmeiner.

machine-translated from German · Show original
RV 18 May 2026 20:3418.05.2026 20:34
Nope - our display and data processing of capacity is as follows:

=> Show what is received in the corresponding byte on the telemetry

And that applies to all controllers. If something were wrong there...

Therefore - a problem for XL or Hobbywing.

But - since Carl is the XL/HW representative here - he can certainly address this for further processing or pick it up here.

Nevertheless - which flights were those? - Then I'll take a look at the cloud.

@Carl: The controller info menu shows a question mark as the controller type – is that normal? If so, HW should tell me the type and the corresponding code...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




Edited 3 time(s). Last edit at 05/18/2026 08:40PM by RV.
machine-translated from German · Show original
Zalo 18 May 2026 23:4618.05.2026 23:46
What BEC voltage is recommended for the Stratos 200? I've heard it apparently matters; is there any information on this?
machine-translated from German · Show original
HeliALEX 19 May 2026 08:3019.05.2026 08:30
Zalo Wrote:
-------------------------------------------------------
Which BEC voltage is recommended?
> the Stratos 200? I heard that plays
> Apparently plays a role, is there any information about this?

8 volts, the servos are HV-capable
machine-translated from German · Show original
jgmeiner 19 May 2026 12:1719.05.2026 12:17
I should add that I'm using the Stratos-200 preset and have tweaked it slightly. I haven't touched the model settings yet (except for min/max pitch).

@Rainer, for example, this one: https://www.vstabi.info/en/cloud?action=edit_flight&start=0&ftime=alle%20Logs&Aid=DMW6C3NMSB&Sid=DMW6C3NMSB&sort=Neue%20Zuerst&model=alle%20Modelle&vbar=Alle%20VBar&flightno=1779122449&list=flightlist

The attached image clearly shows that there's a sudden jump. And then another one...
Could this be due to a loose connection in the telemetry line? I'm using the included adapter, which seems a bit flimsy to me...



Edited 1 time(s). Last edit at 05/19/2026 12:20PM by jgmeiner.

machine-translated from German · Show original
Eddi E. aus G. 19 May 2026 13:1919.05.2026 13:19
Good morning,

I don't think it has anything to do with the connection. Data, bytes, are being transmitted in our direction, and if one byte arrived fragmented, in my opinion the next one wouldn't be worth about 12,000 bytes more.
Interesting, then it counts about 100 mAh again, then jumps back up to 12,000.
More precisely, first 112 (divisible by 16) then 64 (divisible by 16) suggests some kind of shift that shouldn't be there.

It looks more like the counter in the controller is jumping around, a comma or a bit or a few are shifting, I don't know.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
jgmeiner 19 May 2026 13:5019.05.2026 13:50
Okay, thanks for the analysis!
It's not like it's a showstopper. But it would be interesting to know if this is an isolated incident, or if other Stratos pilots are experiencing the same problem.



Edited 1 time(s). Last edit at 05/19/2026 01:53PM by jgmeiner.
machine-translated from German · Show original
PeteStewardson 19 May 2026 14:1019.05.2026 14:10
I was seeing this also, however I changed the BEC to 8v and LVC to under 3v and it han't happened since. However I know others have also seen this with the 8v BEC setting.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Eddi E. aus G. 19 May 2026 14:1919.05.2026 14:19
Yeah, I have no idea, I could be wrong.

But it's interesting, there are flights where it seems to count normally, and then there are some with jumps of 12,000.

There might also be an electrical fault involved, which could be causing the controller software to hiccup... at least it doesn't seem to be anything that the stabilizer is noticing (the normal log and the radio signal are clean).
Having a speed controller integrated into the motor is practically a novelty; I have no idea what all could be possible with that :-)

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
ulrich 19 May 2026 15:3719.05.2026 15:37
The capacity is transmitted as an absolute value from the controller to the stabilizer in each packet. In addition, there is a CRC and a key, both of which must match. Transmission errors can be ruled out; otherwise, there would only be one packet, and the capacity would revert to the previous value.
Unfortunately, I cannot investigate it at the moment because I don't have a test helicopter yet.

So long... Uli
http://www.vstabi.de
machine-translated from German · Show original
Carl-Henning Siebert 20 May 2026 05:4920.05.2026 05:49
Good day,

The BEC voltage can be set to 8.3V.
The problem with HW telemetry is known. HW is working on fixing it.
As soon as I have information, I will post it here.

Kind regards
Carl
machine-translated from German · Show original
Eddi E. aus G. 20 May 2026 11:1520.05.2026 11:15
Good morning,

A quick question for the hopefully rapidly growing collective intelligence: this appears to be a 4s setup?
I just got another customer who has the same effects (+ worse ...), also 4s.
Can anything be deduced from this, or connections made? Carl, do you have any experience with this?

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Carl-Henning Siebert 20 May 2026 12:5420.05.2026 12:54
Good morning,

I'll call HW tomorrow.
I have already forwarded the problem to HW.
I'll get back to you when I have new information.

greeting
Carl
machine-translated from German · Show original
Eddi E. aus G. 20 May 2026 13:4720.05.2026 13:47
Good morning,

I just had a 4s customer on the phone... nobody flies this thing with 3s?! :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
xhavier 20 May 2026 17:5920.05.2026 17:59
Hi it happens on my s200 / evo too. 4s



Edited 1 time(s). Last edit at 05/20/2026 06:27PM by xhavier.
machine-translated from German · Show original
RV 20 May 2026 18:0420.05.2026 18:04
I have also sent an email to my contact at HW for this AND for the lack of information about a new ESC type for the info panel to show (currently "?" shown). But - don't mess it up, these are 2 different stories but regarding to the same manufacturers.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Herr Rossi 22 May 2026 21:4022.05.2026 21:40
Hello everyone,
I made 5 flights today with a 3S setup.
So far everything looks normal.
According to my Junsi 4010, it recharged 502 mAh once and 505 mAh a second time. Everything seems fine to me.
The flights were very relaxed, though. Just messing around in the garden with benches 1 and 2. A flip here, a few slow tic-tocs there, etc.
Everything is still using the original preset.

greeting
Rüdiger

machine-translated from German · Show original
jgmeiner 23 May 2026 15:1023.05.2026 15:10
It usually happens every 3-4 flights for me. However, since I set the cutoff to 3V, it's been quiet. I'll keep monitoring it...
machine-translated from German · Show original
MarcoWeh 31 May 2026 14:0831.05.2026 14:08
Is there any news regarding a suitable hardware update?
I also get this message every 3-4 flights. I have the timer running as a backup, but I'd prefer to turn it off.



Edited 1 time(s). Last edit at 05/31/2026 02:08PM by MarcoWeh.
machine-translated from German · Show original
Eddi E. aus G. 1 June 2026 09:0701.06.2026 09:07
Good morning,

I've only heard secondhand that HW is working on it and/or has already fixed it, but presumably it hasn't been released yet?

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
thomas1130 2 June 2026 14:1402.06.2026 14:14
Hi everyone,

I now also have a Stratos 200 with EVO (Gen2) - first flight today - and immediately had the -2000% battery after about 40 seconds of flight time.

I also fly with 4s - everything is up to date with the latest software.

LG
Thomas

machine-translated from German · Show original
Herr Rossi 2 June 2026 17:0002.06.2026 17:00
Hello,
It happened to me last week too. Mid-flight, the battery consumption indicator jumped up by 11931 mAh. It always shows 11931 mAh.
I've made about 15 flights now and the error has occurred twice. So for me, it's not too bad.
With a friend of mine, it's exactly the opposite. Out of 15 flights, the fuel consumption display is only correct maybe once. :-(
It's a bug in the hardware controller, and a bug fix beta firmware is already available.
When HW will officially release a firmware update is anyone's guess. :-/

Best regards
Rüdiger
machine-translated from German · Show original
thomas1130 2 June 2026 18:1602.06.2026 18:16
Mr. Rossi wrote:
-------------------------------------------------------

It's a bug in the hardware controller and there are already...
> a bug fix beta firmware.
> When HW officially releases a firmware update
Whether it will bring is written in the stars. :-/

And how I'm going to get that working on my hardware controllers is completely up in the air :-/
machine-translated from German · Show original
Herr Rossi 2 June 2026 19:3402.06.2026 19:34
In principle, the controller can be programmed and/or flashed using a hardware programming box.
You just need to know which one! :-)
So, the "Multifunction LCD ProgramBox" with the white lettering doesn't work. The one with the blue lettering does. You can set parameters and flash firmware with it. You can't set parameters with the "OTA Programmer," but flashing might work if there's a firmware update in the hardware database. So far, nothing's working for me. (I bought this Bluetooth module because I thought it would solve my future needs and allow me to configure and flash all my hardware controllers via Bluetooth with my phone. The module only handles the communication with the controller; the software does the rest. I guess I was wrong! :-)
Yes, and then there's the "Multifunction LCD ProgramBox Pro". With that, I can adjust the parameters and also flash firmware. The Stratos controller is recognized as "Platinum V5", by the way.
So, with the right ProgramBox and firmware, it should work. :-)



Edited 1 time(s). Last edit at 06/02/2026 08:05PM by Mr. Rossi.
machine-translated from German · Show original
svenb 2 June 2026 21:0602.06.2026 21:06
Hier ein Auszug aus der Stratos 200 Gruppe!




Especially for vbar users - telemetry doesnt work correctly after you use hold . There is required update of your esc in the model via programming card by newest version of hobbywing app :
https://www.dropbox.com/.../USB-Link-XL200-20260527.rar...
How to connect :
https://www.facebook.com/reel/2418086551951308/?fs=e&s=TIeQ9V&fs=e&fs=e
I tested that on my model and its works , no longer bug with telemetry.
VStabi VStabi Pioneer of Flybarless