← XL Power Support

Stratos 3-blade preset translated

OEM models › XL Power Support · Started by thomas1130 on 12 August 2026 14:3112.08.2026 14:31
thomas1130 12 August 2026 14:3112.08.2026 14:31
Hello everyone,

I thought I'd start a new thread about the third page 8-)

Since my 3-blade propeller is on its last legs - and I want to use an EVO aluminum propeller with it, I've loaded the new preset for the 3-blade propeller:

And lo and behold - TTE is at 125 on all 3 benches!?

Is that realistic – or rather “optimistic” – do different rules apply to a 3-leaf game than to a 2-leaf game?

Thanks!

Best regards,
Thomas



Edited 1 time(s). Last edit at 08/12/2026 02:31PM by thomas1130.
machine-translated from German · Show original
thomas1130 12 August 2026 15:2512.08.2026 15:25
I can answer my own question right now.

ATTENTION - to all silent readers - do not fly directly with the 3-blade setup :-)

I reduced the TTE to 80 "just to be safe" - and almost lost it only during a test hover :-)

The helicopter is brand new and in its original packaging - however, just like my other Stratos, 75/76 TTE is the absolute maximum - above that it becomes completely unflyable...

There is some good news too - the vibrations seem to be much better with the plastic rear clamp.

Best regards,
Thomas



Edited 2 time(s). Last edit at 08/12/2026 03:50PM by thomas1130.
machine-translated from German · Show original
Daniel M. 12 August 2026 15:4412.08.2026 15:44
Good luck and have fun! You're really keen on it! It's great to hear the vibrations are much better! Maybe that will simplify things! If it ever comes to that, I'll get the 3-blade head too! I'd love to fly it sometime! Thanks so much for all the diligent testing!
machine-translated from German · Show original
Daniel M. 12 August 2026 15:4512.08.2026 15:45
Those are supposed to be thumbs up, no idea why there are question marks there, sorry.
machine-translated from German · Show original
ulrich 12 August 2026 18:3112.08.2026 18:31
So, setups are back, please update once, then everything will be safe for now. XL will take care of everything else later.

So long... Uli
http://www.vstabi.de
machine-translated from German · Show original
MGU 12 August 2026 18:4012.08.2026 18:40
I would like to thank you all again. The problems were identified, and a quick response was implemented to resolve them.
machine-translated from German · Show original
thomas1130 12 August 2026 19:2912.08.2026 19:29
Ulrich Wrote:
-------------------------------------------------------
So, setups are back, please check them out.
Update it, then it'll be safe for now.

Great - thank you for your efforts :-)

I am convinced that we will ultimately achieve a superb performance with the EVO :-)

LG
machine-translated from German · Show original
thomas1130 13 August 2026 11:0713.08.2026 11:07
Today, maiden flights with the 3-blade Stratos - 4s - EVO Alu

Still using yesterday's "dangerous" setup - however, TTE significantly reduced (to about 65)

It flies beautifully :-)

Zero vibrations! (Plastic rear clamp)

The only issue is a slight (rapid) tremor at the tail when hovering at low speed - which I haven't been able to eliminate yet by changing the gain.

Otherwise - it works great with the EVO :-)



Edited 2 time(s). Last edit at 08/13/2026 01:20PM by thomas1130.

machine-translated from German · Show original
Daniel M. 13 August 2026 13:1413.08.2026 13:14
Great, I'm so happy for you! If possible, please post a video! So we can see the performance. Because if it works well, then I'd like to treat myself to the 3-blade head too! Cheers!
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless