← VBar NEO for external transmitters

neo - Bank inactive translated

VBar › VBar NEO for external transmitters · Started by DBoillat on 22 January 2025 11:1522.01.2025 11:15
DBoillat 22 January 2025 11:1522.01.2025 11:15
Hello,
Since I changed my remote control, my bank no longer works. Everything is active in the VBAR control system.
In summary, the helicopter is rotating at full speed.

I updated the Neo, created a new configuration, but the bank still doesn't work.
If I use the old remote control, the bank no longer works.

Thank you for your help
machine-translated from German · Show original
Eddi E. aus G. 22 January 2025 11:4422.01.2025 11:44
Hey,

When using an external transmitter, the bank switching function, like all other functions, is assigned a channel number and thus a function in the VBar setup software.
Of course, the corresponding channel must also be configured in the transmitter (transducer, center, directions, travels; this must then also be visible in the transmitter's servo monitor).

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless