Hello everyone!
It's about a T-Rex 700 in an HCB-Hughes 500E and a Witte 5-blade head.
For a 4-sheet exercise, it's a "simple exercise".
When I steer Nick, the other two blades (towards the tail and nose) must not move (or hardly move at all).
I'll keep adjusting the VBC-T until it fits well :-)
Well, with this 5-leaf pattern, all but one are moving, some more, some less.
Do you have any tips on how I should approach this? ;-)
Thanks!
Greetings from Vienna
Karlheinz
--------------------------------------------
Courage can't be bought, but you can buy spare parts!
--------------------------------------------
Hughes 500 OH-6 Cayuse (NEW): https://www.youtube.com/watch?v=biCJ3WQvPvA
Compass Chronos in a Hughes 500E hull https://www.youtube.com/watch?v=yt8gUwXUPkk&t
Roban EC 130 800 Superscale https://youtu.be/KDYJpx1HPBc?si=ea27iVUrmAZgeove
It's about a T-Rex 700 in an HCB-Hughes 500E and a Witte 5-blade head.
For a 4-sheet exercise, it's a "simple exercise".
When I steer Nick, the other two blades (towards the tail and nose) must not move (or hardly move at all).
I'll keep adjusting the VBC-T until it fits well :-)
Well, with this 5-leaf pattern, all but one are moving, some more, some less.
Do you have any tips on how I should approach this? ;-)
Thanks!
Greetings from Vienna
Karlheinz
--------------------------------------------
Courage can't be bought, but you can buy spare parts!
--------------------------------------------
Hughes 500 OH-6 Cayuse (NEW): https://www.youtube.com/watch?v=biCJ3WQvPvA
Compass Chronos in a Hughes 500E hull https://www.youtube.com/watch?v=yt8gUwXUPkk&t
Roban EC 130 800 Superscale https://youtu.be/KDYJpx1HPBc?si=ea27iVUrmAZgeove
Hallo zusammen!
Es geht um einen T-Rex 700 in einer HCB- Hughes 500E und Witte 5-Blatt Kopf.
Bei einem 4 Blatt eine "einfache Übung".
Wenn ich Nick steuere dürfen sich die beiden anderen Blätter (zum Heck und Nase) nicht (oder kaum) mit bewegen,
da verdrehe ich in der VBC-T so lange bis das gut passt :-)
Nun, beim diesem 5-Blatt bewegen sich alle, bis auf eines, manche mehr, andere weniger.
Habt ihr Tips wie ich das angehe? ;-)
Danke!
Gruß aus Wien
Karlheinz
--------------------------------------------
Mut kann man nicht kaufen, Ersatzteile schon!
--------------------------------------------
Hughes 500 OH-6 Cayuse (NEU): https://www.youtube.com/watch?v=biCJ3WQvPvA
Compass Chronos im Hughes 500E Rumpf https://www.youtube.com/watch?v=yt8gUwXUPkk&t
Roban EC 130 800 Superscale https://youtu.be/KDYJpx1HPBc?si=ea27iVUrmAZgeove
Es geht um einen T-Rex 700 in einer HCB- Hughes 500E und Witte 5-Blatt Kopf.
Bei einem 4 Blatt eine "einfache Übung".
Wenn ich Nick steuere dürfen sich die beiden anderen Blätter (zum Heck und Nase) nicht (oder kaum) mit bewegen,
da verdrehe ich in der VBC-T so lange bis das gut passt :-)
Nun, beim diesem 5-Blatt bewegen sich alle, bis auf eines, manche mehr, andere weniger.
Habt ihr Tips wie ich das angehe? ;-)
Danke!
Gruß aus Wien
Karlheinz
--------------------------------------------
Mut kann man nicht kaufen, Ersatzteile schon!
--------------------------------------------
Hughes 500 OH-6 Cayuse (NEU): https://www.youtube.com/watch?v=biCJ3WQvPvA
Compass Chronos im Hughes 500E Rumpf https://www.youtube.com/watch?v=yt8gUwXUPkk&t
Roban EC 130 800 Superscale https://youtu.be/KDYJpx1HPBc?si=ea27iVUrmAZgeove
machine-translated from German · Show original