← VBar NEO for external transmitters

VBar Evo - Spectrum Satellite - Tele Port not working translated

VBar › VBar NEO for external transmitters · Started by mi on 17 July 2025 13:1617.07.2025 13:16
mi 17 July 2025 13:1617.07.2025 13:16
Hello everyone!

I have a used helicopter with a VBar EVO with a V8 Pro Rescue.
The previous owner operated the helicopter directly with a VBar Control and also configured the VBar directly through it.

I now want to operate the helicopter with 2 Spektrum SPM9746 satellites connected to the two teleports.

I have already operated several helicopters with various VBars (Mini VBar, VBar Silverline, VBar NEO) each with 2 Spektrum satellites and have never had any problems with them.
This is my first VBar Evo.

Now to my actual problem:
I bound the two satellites to the remote control using a normal Spektrum receiver, as binding via the PC software didn't work for me (I found a solution for that here in the forum) - so far so good.

1 Tele Port (left port) works perfectly - each of the two (previously bound) satellites works on this port.

The first teleport (right port, marked in yellow in the image) unfortunately does not work as expected – the satellite always starts flashing rapidly (bind mode active) and can be found and bound. However, the second, previously working, satellite is then deactivated.
Every time the power supply is switched off and on again, the binding sequence starts from the beginning -> so unfortunately it doesn't work.

The previous owner had established a connection to the controller (YGE 205HVT) Tele-Port at exactly this Tele Port and displayed the controller's telemetry data accordingly on his VBar Control.
I understand that this won't work with my spectrum solution, and that's OK with me.

My plan was to change the transmitter-receiver configuration on the VBar in the PC software and to adopt the remaining settings from the previous owner, as the helicopter worked perfectly with them.

I have already tried the following things - unfortunately none of them solved my problem:
- New configuration via PC software
- Downloaded various apps (including V7) from the App Store and then updated them back to V8.
...unfortunately without success.

Is there any way to restore the VBar to its "factory settings"?

Does anyone have any ideas on how I can get the port on rails?

Thank you in advance for your help,
Wed

machine-translated from German · Show original
Eddi E. aus G. 17 July 2025 16:0317.07.2025 16:03
Hi,

Quote: Mi
I understand that this won't work with my spectrum solution, and that's OK with me.

My plan was to change the transmitter-receiver configuration on the VBar in the PC software and to adopt the remaining settings from the previous owner, as the helicopter worked perfectly with them.

Unfortunately, Spektrum is officially out of the picture, as we can no longer initiate the binding mode.
Therefore, no special attention was paid to it, but the protocols are still there.
This means that previously, or 'actually', already bound satellites worked/work, but we only tested with DSM2 (old, I would never use it again) and DSMX (also quite old, still the one with two antenna stubs), the newer ones no longer work.

Which transmitter will be used for future flights?

V8 definitely won't work with PC software, but a VBar Control should bind directly (you may also need the setup app for the _sender_).
The setup would then remain unchanged, and one could go flying directly after a pre-flight check.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
mi 17 July 2025 16:1917.07.2025 16:19
Hi Eddi,

The previously externally bound satellites do generally work on the EVO - so binding itself is not a problem if you have a Spektrum receiver lying around.

My guess is that the port is still set to "telemetry" and therefore isn't working correctly with the satellite. If there were a way to disable telemetry without using VBar Control, then it might work.

I would like to fly this model, as well as many others, with the Spektrum transmitter (DX10t) - I do not have another transmitter.
Only the previous owner had a VBar Control.

Does this mean I can't configure the V8 with the PC software?
The configuration actually worked completely. The functionality is also present, but only with one satellite.

The only problem is the Tele Port, which was previously used for telemetry and is now supposed to serve a Spektrum satellite.
Is there any way to change that?

Greetings,
Wed
machine-translated from German · Show original
RV 17 July 2025 19:0017.07.2025 19:00
Quote: My guess would be that the port is still set to "telemetry" and therefore isn't working correctly with the satellite. If there were a way to disable telemetry without using VBar Control, then it might work.

Could be – or analogous. The first => Macrocell Setup, the second => VBar Options.


Quote: Does that mean I can't configure the V8 with the PC software?

Yep - V8 is intended for VBC touch and VBC EVO users.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Eddi E. aus G. 18 July 2025 10:0118.07.2025 10:01
Good morning,

TELE or Sat, as I understand it, the VBar only listens to one with TELE, and only to the other with Sat.
I should try that here sometime.

If that were the case, I don't know if it would be overwritten by 'Create New Setup' in the PC software, or rather, it should be if you select Spektrum as the receiver type.

Oh dear, even though this stuff is still lying around here, I somehow never feel like touching it, it's all so cumbersome... the transmitter battery is also empty... let's see if I find the time later to charge it first.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
ulrich 18 July 2025 11:1018.07.2025 11:10
Switching to Spektrum as the RC input disables telemetry. Only one can be used at a time.

So long... Uli
http://www.vstabi.de
machine-translated from German · Show original
mi 18 July 2025 11:3718.07.2025 11:37
Hello everyone,

Then this afternoon I will try to downgrade the EVO to V7 and create a new setup there, since I don't have a VBar Control.

Unfortunately, switching to "Spectrum" under the "Receiver" tab in the V8 using PC software had no effect, regardless of which of the three spectrum variants I selected.

I hope I can use both satellites then. It would be a shame to waste the EVO, and I don't really want to switch to a different stabilizer, as I've always been happy with the VBars in combination with Spektrum.

Kind regards
Wed
machine-translated from German · Show original
Eddi E. aus G. 18 July 2025 11:5818.07.2025 11:58
Hi,

V8, no PC ;-)

But I just tried, and I'm giving up now that my DSMX satellites have completely lost their binding and aren't doing anything at all.

A new morning dawns for used NEOs :-) and with V6, it still works, I was able to bind the satellites again with it.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless