← VBar NEO for external transmitters

EVO with Futaba transmitter - live display constantly moving translated

VBar › VBar NEO for external transmitters · Started by Tabaluga on 17 December 2025 20:0217.12.2025 20:02
Tabaluga 17 December 2025 20:0217.12.2025 20:02
Hello

I have a question that I've just noticed.
I bought two new EVO devices and also installed the rescue function.
When I programmed them, I noticed that the bars for nick roll etc. were constantly moving rapidly in the live display even though I wasn't doing anything and the EVO was stationary.
The voltage was also a bit strange... 10V even though a 5V battery was connected.
Did I do something wrong, or where is the mistake?
Here's a short video about it.

Thank you very much and best regards
Thomas's file attachments:
Open | Download - img-6562-1v9jkr8y_jV3WOZkf.zip (2.4 MB)
machine-translated from German · Show original
RV 18 December 2025 05:4718.12.2025 05:47
This is normal with EVO on a PC. A few other data points are being received – please ignore them.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless