← Logo 700 and 800

8mm Counterbearing

Mikado Model Helicopters › Logo 700 and 800 · Started by mahbouni on 1 September 2016 23:2501.09.2016 23:25
mahbouni 1 September 2016 23:2501.09.2016 23:25
When will the counterbearing and plate for 8mm motor shafts be available?
Eddi E. aus G. 2 September 2016 08:2902.09.2016 08:29
Hi,

no specific date yet. If required like 'now', you could also press out the current bearing and set in a suitable bearing with 8 mm inner diameter.

Kind regards

Eddi

Born to fly ...
forced to work.
mahbouni 2 September 2016 08:3402.09.2016 08:34
I see, so the plate is the same and only the bearing is different. What is the outer diameter and width of the stock bearing?
Eddi E. aus G. 2 September 2016 09:4002.09.2016 09:40
Hi again,

the required bearing would be 8x15x5 mm. I can not yet tell if the plate will be the same in the future, but from a modellers point of view, it's doable.

Mind that 8 mm pinions are only available for the larger main gear from the 700 XXtreme, which also requires the one way for the larger main gear.
This affects the looks of the 700 and adds weight.

Kind regards

Eddi

Born to fly ...
forced to work.
mahbouni 2 September 2016 10:0602.09.2016 10:06
I have a Pyro 750 motor but the shaft is too short. I have to wait some more weeks for Kontronik to release their longer shaft. To get flying sooner I planned to borrow the Pyro 800-48 motor and main gear from my 700xx.

I just searched local bearing specialists in the UK for 8x15x5mm and can not find anything. Lots of 14mm and 16mm OD but not 15mm.

Can I not use the plate from my 700xx?
Eddi E. aus G. 2 September 2016 10:2802.09.2016 10:28
Hi,

no, the old parts won't fit. Plus, the counter bearing is now connected to the motor plate.

If I google the bearing size, I get lots, even on ebay.

Kind regards

Eddi

Born to fly ...
forced to work.
mahbouni 2 September 2016 11:0202.09.2016 11:02
OK, thanks
Bugcatcher 14 September 2016 14:4214.09.2016 14:42
8x15x5 is not a common size but there are some available. Just hard finding a quality bearing instead of a cheap Chinese one.
mahbouni 14 September 2016 14:5214.09.2016 14:52
Exactly. The only quality ones I could find were in other countries and the cost with shipping was silly. I bought an EZO 8x16x5 locally and got my friend to mill out the counterbearing. He makes F1 car parts for a living.



Edited 1 time(s). Last edit at 09/14/2016 02:53PM by mahbouni.
Fasster 16 September 2016 14:2816.09.2016 14:28
I ordered these from Boca for my Pyro 850 Comp

http://www.bocabearings.com/bearing-inventory/Radial-Bearings/18281/8x15x5-MR158ZZPS2



Edited 1 time(s). Last edit at 09/16/2016 02:32PM by Fasster.
krtek2k 23 September 2016 13:1823.09.2016 13:18
Just find around some metalworking company, they can do shaft like you want for similar price like kontronik prices :-)
Motor shafts are nothing complicated.

mahbouni 23 September 2016 13:2623.09.2016 13:26
Good to know for future reference. My milled out plate with 8x16x5 bearing is working like a charm. I think I'll save my money and continue using my Pyro 800-48
VStabi VStabi Pioneer of Flybarless