← Logo 700 and 800

Logo 600SE 2012 side panels translated

Mikado Model Helicopters › Logo 700 and 800 · Started by Bernd S. on 10 March 2026 06:3510.03.2026 06:35
Bernd S. 10 March 2026 06:3510.03.2026 06:35
Good morning,

I'm planning a redesign of my 2012 Logo 600SE.

Do the newer V2 side panels fit without any problems?

Because of some renovations, the old ones aren't as beautiful anymore.

And since I still have parts, it might be worth the effort to rebuild it.

Regards, Bernd
machine-translated from German · Show original
Eddi E. aus G. 10 March 2026 09:2010.03.2026 09:20
Hi Bernd,

Oh dear, that question was already old news ten years ago :-)

Seriously though: take a look at the manual for the last 600 SE.

Besides the side panels, you need the battery plate and the quick-release fastener, and small parts, hood support (which can also be adapted if necessary), the chassis reinforcements are also new (old ... new ;-) ).

But definitely problem-free!

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Bernd S. 10 March 2026 10:0210.03.2026 10:02
Yes, sir ;-)

Sure, but I've only flown occasionally in recent years and haven't been reading along here.

Therefore, I was living in a time capsule.

Thanks for the information!

Bernd
machine-translated from German · Show original
Eddi E. aus G. 10 March 2026 11:4210.03.2026 11:42
:-) it's all ok :-)

If you had a T-Rex or another helicopter from 2012, it would be a different story ^^ you'd really have to sharpen your carving knife if you needed parts or wanted to upgrade :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Bernd S. 21 March 2026 10:2521.03.2026 10:25
I'm not complaining either ;-) .

I also managed to make the "botched" one (due to telemetry overkill) look nice again.
New side panels will be installed when parts need replacing due to wear and tear; I still have belts, pressure rollers, etc. in stock - but everything is currently in excellent condition.

The quick-release fastener is nice too - I'll keep that in mind and thanks for the info.

But first, let's go flying!

Bernd
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless