← Logo 700 and 800

Logo 700 V2

Mikado Model Helicopters › Logo 700 and 800 · Started by steffgiguere on 19 September 2026 20:3419.09.2026 20:34
steffgiguere 19 September 2026 20:3419.09.2026 20:34
Can we ordre spare parts for the Logo 700 V2, plus extra battery tray?
Eddi E. aus G. 21 September 2026 08:5321.09.2026 08:53
Hi,

unfortunately, the parts are still not online.

Please compile a list of what you need and send it to service (at) vstabi (dot) info, and we will see to it.

Kind regards

Eddi

Born to fly ...
forced to work.
flydown 18 October 2026 14:1918.10.2026 14:19
Hello,

What is the maximum permissible size for the battery?
If I could afford an L700, it would get a
8s setup. And my SLS Speed 5100 battery is quite thick.

Greetings, Uwe
machine-translated from German · Show original
Eddi E. aus G. 19 October 2026 08:5819.10.2026 08:58
Hi Uwe,

The battery compartment is quite gigantic, but also asymmetrical (in width).
According to this internet, two 4s would be stacked or even fit lengthwise – I think – but you also have to consider the center of gravity.

With 8s, the motor kv would also be an issue, or it generally comes down to comparatively lower speeds, probably 1300-1400 max.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
flydown 19 October 2026 12:1219.10.2026 12:12
Hello,

I just measured the battery; it's 71mm wide. Or tall. So if that's too much, that would be a shame.

I'd use a 711kv motor, which should work well with the 13-tooth pinion. I just need to find the 8/6mm motor shaft I bought years ago and successfully hid.
Currently, an 8mm blade bearing shaft is installed, but as far as I know, it doesn't fit into the Logo pinion gears.

Let's see.
Thanks, Uwe
machine-translated from German · Show original
ian Spencer 19 October 2026 15:1119.10.2026 15:11
The battery tray is the same as the original Logo 700.
Eddi E. aus G. 19 October 2026 15:3919.10.2026 15:39
Hi,

So, from SLS's website, for the 7s:

Dimension: approx. LxWxH 164x53x64mm
With an 8s battery, the dimensions would probably be 164x53x73 mm (LxWxH).

But when I look at the measurements in the overview there, there must be a mistake somewhere ;-)
Therefore, it's better to measure accurately yourself.

That would fit, though: the clear width in the area of the battery rail is about 60 mm, the height is not a problem, nor is the depth (length).

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless