← VBar Control Classic

Vbar Touch & VBar EVO Update Problem / Nothing works anymore translated

VBar Control › VBar Control Classic · Started by David Penger on 2 November 2025 12:4902.11.2025 12:49
David Penger 2 November 2025 12:4902.11.2025 12:49
Hello,

This morning after breakfast I wanted to update my VBar EVO from V7 to V8.

I successfully flew my new Nimbus 550 V2 with V7 a few days ago and now wanted to update to V8 and try something out this afternoon.
Unfortunately, nothing works anymore, neither with the V7 nor with the V8.

I connected the VBar to a battery to save the V7 setup, and that worked.
I then started the update to V8 by scanning the QR code in the EVO Updater and activating the app.
That worked without any problems.

After the update, a pop-up appeared on the VBar Touch: "The module for VBar EVO V8 is not installed and activated. Network availability is required for installation."
The only option offered to me was/is "remove". See image "01".

On the channel itself, the options for loading the apps are displayed strangely and look cut off.
See image "02".


In picture "03" you can see that the APP EVO V7 Pro add-on is activated, but here too the symbols overlap strangely.

Image "04" shows that other apps such as "Multikopter" are displayed normally and I could also install them.

When I turn on the helicopter or connect a battery to the EVO, after a few seconds the following pop-up appears: "The module for VBar EVO V8 is not installed and activated. Network availability is required for installation." (See image "04").

I ran the VControl Update Manager several times, hoping that the problem would be solved.
(See image "05".

Then I desperately tried to salvage Sunday and simply go back to the V7 to make it to the airfield today.
I had to repeatedly click away the pop-up and then quickly navigate to the VBar Neo/Evo Updater menu item to reinstall V7.

Unfortunately, after updating to V7, the following pop-up appeared: "The module for VBar EVO V7 is not installed and activated. Network availability is required for installation."
It even shows me that it's "Active". "Image "06", there seems to be a problem here, I would really appreciate some help.

When I look at the whole thing in the browser on my iPhone, it currently looks like this (Image "07").
So, apart from the basic app "Vsabi EVO V8 Pro Setup", it's actually quite good.

It would be great if someone could solve my problem or give me some help on how to get it under control again.

Best regards and have a nice Sunday,
David

machine-translated from German · Show original
David Penger 2 November 2025 13:0702.11.2025 13:07
I also made a short video: https://youtube.com/shorts/4GFOi-ggcuM?si=4v3Frj4CAWj7vWYI
machine-translated from German · Show original
RV 2 November 2025 16:5202.11.2025 16:52
Stabilization: 27009082 - 7.1.74
VBC: 11006351 - 1.1.418

Based on the video and the missing log codes, it looks like the transmitter apps are not reporting correctly.

Do the following:

Try switching the language to EN using the VBC and test it. If it works then, switch back to DE. This would reload all apps ;-)

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
David Penger 2 November 2025 19:0302.11.2025 19:03
Hello Rainer,

Unfortunately, the attempt was unsuccessful.

After changing the language, the menu remained in German (but the previous update screen was in English).
Image 01

I then restarted the Vbar Touch and ended up in a menu I hadn't seen before.
There I then executed "Start Check" and afterwards "Start Update".
Unfortunately, there's nothing more I can do.

See more pictures and video: https://youtube.com/shorts/1Y5qN7xjXLY?si=17XtqI53CXnpQ6cQ

When I start Vbar Touch, I always end up there now.


Thank you so much for your help and best regards,
David



Edited once. Last edited on 02/11/2025 at 19:03 by David Penger.

machine-translated from German · Show original
RV 2 November 2025 21:2202.11.2025 21:22
OK - and what if you format the disk beforehand?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
David Penger 2 November 2025 21:5102.11.2025 21:51
Good evening Rainer,

Unfortunately, that wasn't successful either.
This is the end of the line.

https://youtube.com/shorts/MDIdLzF2Gr4?si=lsARCVI4fFX7NFUw

What else can I do?

Best regards,
David
machine-translated from German · Show original
RV 2 November 2025 22:1702.11.2025 22:17
Please create a service case for this VBC.

To do this, log in to vstabi.info and navigate to your device list (bottom left). Click on the service icon next to the relevant device.

Please fill out the form (first contact details, then a description of the problem). You can also attach images, logs, etc. If it's a warranty claim, please upload your purchase invoice.

After submitting the form, a confirmation email will be sent automatically.

Eddi will then contact you via email as soon as possible.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
David Penger 2 November 2025 22:3502.11.2025 22:35
Okay, will do.

Thank you for the quick replies.

Best regards and have a nice evening,
David
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless