← VBar Control Classic

VBC Evo+ Display turns black translated

VBar Control › VBar Control Classic · Started by Peter Tuerk on 11 October 2025 22:0511.10.2025 22:05
Peter Tuerk 11 October 2025 22:0511.10.2025 22:05
During flight, the display goes black. What exactly goes black varies; sometimes the icons remain, sometimes everything disappears.
The lower V8 menu can be accessed by swiping upwards, as can the gyro function, so the side menu works.
But you can still pay taxes.
Likewise, perhaps it's related, binding didn't work, it only started after stirring the stick.
I saw on Facebook today that someone posted about this, saying it's not an isolated incident.
Well, after Touch gave up on Wi-Fi after 3.5 years, I'm not thrilled that the same problems are now appearing with the second Evo+ unit. The system is from May 2025 and was retrofitted to Evo+ at your place.
machine-translated from German · Show original
RV 11 October 2025 22:2011.10.2025 22:20
Hello Peter,

Reels or anything else on any social media platform are irrelevant to us until the affected customer contacts us, either here, by phone, or via email to customer service or an RMA case. We do not use any other media.

But now to your case:

If the main screen shows this error - and you swipe to the second screen - is it displayed "normally" or are some colors missing there as well?

Are you using custom screens or the standard screen?

And what is the serial number of the system?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Peter Tuerk 11 October 2025 22:4611.10.2025 22:46
Hi Rainer

Phew, it's hard to say whether any colors were missing in the submenu, but I'd say probably not.
I've had the transmitter running for 1.5 hours now, everything is normal without the receiver on.
This also didn't occur when setting up Hubi, which I built in the last two days.
Up until now, once after landing a week or two ago, the helicopter unplugged and the screen went completely black, but the submenu was still accessible. It happened again today during the flight, but also quite near the end. This time the icons in the top row remained, otherwise everything was black.
11005902
It had a US theme, it was currently set to black, but I'll change it to light blue and see.



Edited twice. Last edited on 11/10/2025 at 23:00 by Peter Tuerk.
machine-translated from German · Show original
RV 12 October 2025 18:5412.10.2025 18:54
Please do one of these:

On screen 1, long-click on an empty area - and then check in the screen settings whether everything is set to "default".

Then long-click again and select "Reset".

This resets the screen designs – there was a change when switching to V8. We don't want anything getting messed up.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Peter Tuerk 12 October 2025 22:3912.10.2025 22:39
Hi Rainer
OK, done, default_vbar was displayed everywhere, then reset.

But I found something out in the process.
Initially, I pressed the button in the main menu and nothing worked because no helicopter was connected, so I used two TDSF devices: a Neo V7 and an Evo V8. Everything worked fine with the V8, so I followed your suggestion.
Then came the aha moment, because everything unnecessary was deactivated on the transmitter, including the menu for controlling Neo V7.

When the Neo is plugged in, the screen goes black, the battery selection appears, followed by the next window with an installation prompt.
After installation, the USA theme reappears.

I also have a second, older Evo, retrofitted with the same reverb unit. I deleted the Neo V7 control menu in Basics and connected the TDSF with the Neo V7, first binding, then battery selection, and then the installation prompt.
No black or white screen, the whole time focused on the USA theme.
I took pictures of it, but the topic can be described well anyway.
I performed the entire test twice with the same result on the old Evo, and three times with the new Evo.
One small postscript: if TDSF is not yet bound to V7, then with an intact screen, the option to bind will appear, and the screen will then be black or white, depending on the topic.
If the battery is already bound, but then the Basic Neo V7 controller is uninstalled, the screen goes black immediately upon connection. However, as described above, the battery selection window and installation prompt still appear.
machine-translated from German · Show original
RV 13 October 2025 07:0313.10.2025 07:03
Hello Peter,

So it seems (I don't quite understand it right now) that it's somehow due to the combination of theme and stability.

Try this:

Uninstall (not just disable) all themes, the VBar NEO (V6) and V7 add-on apps, the V8 app, and the Userscreen app. We'll stick with English, as far as I can see.

Then turn the transmitter completely off and on again.

Now we'll start with a V7 helicopter - install the NEO and V7 add-on apps. Test with the helicopter.
Then the V8 app and a V8 helicopter.
Then try the black theme, then test both.
Then add the US theme and test both.

I would like to know if we can find out at which combination things go wrong.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




2 mal bearbeitet. Zuletzt am 13.10.2025 19:59 von RV.
machine-translated from German · Show original
Peter Tuerk 13 October 2025 10:3013.10.2025 10:30
Hi Rainer
If everything is pre-installed in the base version, everything works as desired; switching from V7 to V8 is completely problem-free.

Does the new Evo need to install something afterwards because it notices that something is missing? Does it change the startup screen to the basic color of the theme, or to blank, i.e. white, if nothing is specified?

The older Evo version displays the startup screen, with or without a theme.
On the older Evo, you can't customize the screen; everything is predetermined.
On the older model you can still separate the models, which is no longer possible on the newer one, but that's better anyway.
I wouldn't call what the newer Evo does a mistake; it's just solved differently.

It's not so great when you're flying or a helicopter is on the ground in front of you at 1900 meters and you're looking down at a completely blank screen, or when only icons are visible at the top.

Let's see how this develops; the only thing I need is assurance that flying in these conditions is safe and that I won't mow down my flight students.
machine-translated from German · Show original
Eddi E. aus G. 13 October 2025 16:0013.10.2025 16:00
Good morning,

So if only the display goes black (graphical or backlight), but it can still be operated (touch, for example), or the model remains connected (control/switch), it is not critical.

If it works fine with standard apps (without a custom screen or themes), then it's probably not critical at all; it's just that something is wrong with the way the apps are configured, or something is duplicated, or something else is wrong.

However, we cannot give a free pass until the matter is fully clarified.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Peter Tuerk 13 October 2025 19:0813.10.2025 19:08
Good bye

OK, then I'll borrow the Evo from a friend, which also has the lithium-ion battery, and see what it does. Then I'll see if my device is faulty; the older Evo has a different display and therefore can't be compared to the newer one.
machine-translated from German · Show original
RV 13 October 2025 20:0213.10.2025 20:02
People,

Please, let's not get so confused here. Let's stick to ONE setup – do the above and only that, and please reply. Otherwise, I'm out.

Additionally, you can ALWAYS design the screen if you have downloaded the app! - even with older VBar Control models without "evo".

Please do exactly this with the problematic system and nothing else:

Quote: Uninstall (not just deactivate) all themes and the VBar NEO (V6) and V7 add-on apps, the V8 app, and the Userscreen app. We'll stick with English, as far as I can see.

Then turn the transmitter completely off and on again.

Now we'll start with a V7 helicopter - install the NEO and V7 add-on apps. Test with the helicopter.
Then the V8 app and a V8 helicopter.
Then try the black theme, then test both.
Then add the US theme and test both.
Then add the user screen and test it (this may vary from helicopter to helicopter as it is model-specific).

I would like to know if we can find out at which combination things go wrong.

By the way, Peter, the emails from the server are bouncing back as undeliverable. Please update your Mikado ID with your current email address, log out and back in on the main page, and let us know so we can then switch the devices...

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.




1 mal bearbeitet. Zuletzt am 13.10.2025 20:04 von RV.
machine-translated from German · Show original
Peter Tuerk 14 October 2025 09:3314.10.2025 09:33
Hi Rainer

I wrote it above, I did everything you suggested and it works.

I've now performed a complete reset and will only install the bare essentials.

My friend's Evo works exactly the same as mine, and both are equally different from the older model.

My Mikado ID address works; I've already contacted you through it, and recently Eddi as well.
machine-translated from German · Show original
RV 14 October 2025 16:1614.10.2025 16:16
So, as far as I can tell, the original topic of this thread is resolved.

But why a complete reset – and above all, how?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
RV 14 October 2025 16:1714.10.2025 16:17
By the way... the email address relates to the forum notifications. Should I switch to the "new" email address?

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Peter Tuerk 14 October 2025 19:1614.10.2025 19:16
Hi Rainer

I reset the transmitter using the Welcome app.
I cannot say whether the problem is solved, whether it's a black display or a partial failure of the display, because it only happened once after the flight after unplugging the battery, and once shortly before the end of a flight.

Eddi says you can't give a 100% guarantee of airworthiness.

I bought the system used a few weeks ago, with receipts.
I was assured it was an unused backup remote control that had never been used.

The completely black screen happened on the very first flight.

I've now activated the screenshot switch and always have my phone with me, because there's no point in sending you the attachment if things only happen sporadically.
If it happens again, I'll invest in a new motherboard and that's that, perfect.
So far, everything is going well for Mikado.

The only change I would suggest based on the many tests is that you should build in a safeguard to prevent the system from binding if the software is not connected to the transmitter.
It doesn't matter to him what kind of VBar he wants to bind to, he accepts everything, but then shows a blank screen on newer Evo models, and a boot screen on older Evo models, and is fully connected.
It wouldn't be a tragedy, one might think, but when the servos suddenly go haywire, one quickly changes one's mind.
I achieved this by disabling the installation prompt and uninstalling V7 or V8, and then connecting V7 or V8.
One could produce a malicious, damaging video and publish it on social media.

It's already being advertised in some places that the transmitter and flybar are cheaper than an Evo stabilizer with rescue system, and much faster thanks to ELRS.



Edited twice. Last edited on November 7, 2025 at 12:32 PM by Peter Tuerk.
machine-translated from German · Show original
Eddi E. aus G. 15 October 2025 09:1115.10.2025 09:11
Good morning,

The idea is the opposite: even if the software were deleted, or the transmitter restarts for any reason, already bound VBars should be reconnected immediately.
Controls, motor, bank always work; the settings for flying (even with a 'dead' transmitter) are all stored in the VBar.

Simply because – if something does happen 'once in a hundred years', it shouldn't fail because of that.

Example Graupner: if, in the event of a brief dropout/loose connection or if I accidentally switched off the transmitter, I first have to confirm – quiet beep-beep-beep, look, click – whether the RF module should be switched on (again)...?

And as far as software is concerned, we have the Auto Install Notification, which reports when a required app is missing.
If you turn them off... I mean, I could also (yet another stupid car example) turn off ESP, ABS, all sorts of helpers, and then say, yes-but.

A little personal responsibility is also involved :-)

You might not really be able to blame the seller if something happened over time (data became corrupted), which then – Murphy's Law – only happened to you and unfortunately almost immediately.

Screenshots, photos, and videos can be helpful, of course.
Similarly, systematically analyze the issue, first eliminating the most obvious cause (in this case, for example, disabling the User Screen App), or reset User Screens (which are also stored on the transmitter, _User_ Screen, not _Model_ Screen, so it might work fine with another transmitter, while something is going wrong on your own).

Welcome or formatting will help in the end, but then you haven't learned anything, e.g., whether it's an isolated case or whether there's still room for improvement.

No offense intended :-) I understand that this can be – let's say – disturbing and not necessarily good for trust.
But 'things happen' (sounds lame... just like, it's electronics...), and for that reason we have a plan B for everything whenever possible.

Let's stay tuned :-)

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Peter Tuerk 15 October 2025 12:4615.10.2025 12:46
Hi Eddi

No offense, I didn't mean to be preachy, I just thought it was a good idea to make things safer.

I have another question.
Would the Welcome App also remove items if the previous owner had been using a computer for remote control?

Because I'm not flying with it anymore until I'm sure it has the 100% factory settings.
machine-translated from German · Show original
Eddi E. aus G. 15 October 2025 15:0215.10.2025 15:02
Hi,

Welcome deletes all user data and apps and essentially resets the transmitter to factory settings.

However, if the file system or the file allocation table is corrupted, and some storage areas are not/no longer correctly marked, the app can't fix anything.

Format, then format again on the diagnostic screen of the transmitter (to make sure it really is our file system), then VBar Control Manager, and everything is new.
This means you also have to redo the stick calibration and the rotary encoder calibration, reassign the switches, readjust all other settings, and when reconnecting models, check the special switches and reassign them once (rescue, throttle cut).
Like new, basically.

However, the connection to models is maintained, as it is stored in the radio module.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Peter Tuerk 6 November 2025 16:0106.11.2025 16:01
For those reading along, since formatting according to Eddi's instructions, no further errors have occurred.
machine-translated from German · Show original
thomas1130 6 November 2025 18:2406.11.2025 18:24
Yes - I'm reading along here.. :-)

And even at the risk of Rainer being "unhappy" because I'm writing here - but my transmitter also suddenly went "black" on the display in the middle of the airfield recently...

Not quite – only the "main screen" was black – if you scrolled down, the V8 page appeared.

Flying went smoothly...

I restarted the transmitter after the flight - everything is back to normal.

It was probably a one-off hiccup - at least so far.

Best regards,
Thomas
machine-translated from German · Show original
Peter Tuerk 7 November 2025 10:3107.11.2025 10:31
Thanks Thomas for your contribution, I think safety should come before loyalty.

I train young people free of charge as part of my work with young people; their parents entrust their children to me.

I am grateful to Eddi for his honest answer regarding whether safe operation can be guaranteed.

I am now worried about my other Evo because of an incident with the engine off switch, where the system announced "Engine Start" in addition to "Engine Stop"; this was also fixed by formatting.



Edited twice. Last edited on November 7, 2025 at 12:22 PM by Peter Tuerk.
machine-translated from German · Show original
Peter Tuerk 7 November 2025 12:2507.11.2025 12:25
But so far everything is fine, I think it's great that the service provides such quick support.
Thanks to Eddi and Rainer.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless