← Logo 400 ... 690

Identification of hardened HRW translated

Mikado Model Helicopters › Logo 400 ... 690 · Started by windesigns on 25 December 2024 17:4725.12.2024 17:47
windesigns 25 December 2024 17:4725.12.2024 17:47
Hi und Frohe Weihnacht.

Habe hier noch eine neue HRW für meinen 550SE 1.gen. In 199mm (Leider ohne Verpackung),welche ich gerne verbauen möchte.
Kann man optisch den Unterschied zwischen der normalen und der gehärteten Welle erkennen.
Meine hat übrigens oben das Mikadologo drauf.
Vielen Dank und schöne Feiertage.
Gruß Ralph



1 mal bearbeitet. Zuletzt am 25.12.2024 17:48 von windesigns.
windesigns 4 January 2025 17:1304.01.2025 17:13
Hello and Happy New Year!

Is it possible that the 10x199mm version was never available in a hardened version?
I must have mixed something up there.
It's actually quite cheap, but the durability/availability ratio isn't very good…
At that price, you might as well stock up on a few.
Hopefully, there will soon be a decent supply of spare parts in the shop again.
Thank you.
Regards, Ralph
machine-translated from German · Show original
ikarus991 5 January 2025 15:3105.01.2025 15:31
Yes, I can only hope for the best regarding spare parts!
Last Friday we had our club night again and two new helicopter pilots decided to go to a different manufacturer for the upcoming season!
After observing the shop and its availability for a very long time...
TOO BAD....

wolfgang
machine-translated from German · Show original
Eddi E. aus G. 6 January 2025 09:1506.01.2025 09:15
Hi Ralph,

According to the specification, the 10x199 is hardened in the area of the freewheel bearing, i.e., partially hardened.
MW all current waves are implemented in this way.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
windesigns 6 January 2025 10:0106.01.2025 10:01
Thanks again!
Regards, Ralph
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless