Hello everyone,
Subject: Logo 550 SE with YGE 95A controller, Savox servos, 1st blades, Vbar Neo, light aerobatics.
During fast forward flight at 1750 rpm, a resonance noise is clearly audible. It doesn't improve even at 1850 rpm.
Furthermore, at low speeds (1500 rpm) a slight torsional oscillation also occurs at the rear.
At a speed of 1750 rpm, the torsional oscillation improves, but it does not disappear.
I tried all possible settings, including different rotor blades, without any change in behavior.
The vibrations are minimal.
The helicopter is otherwise flying normally.
Do you have any idea where the problems might lie?
Thank you in advance for your feedback.
greeting
Philippe
Subject: Logo 550 SE with YGE 95A controller, Savox servos, 1st blades, Vbar Neo, light aerobatics.
During fast forward flight at 1750 rpm, a resonance noise is clearly audible. It doesn't improve even at 1850 rpm.
Furthermore, at low speeds (1500 rpm) a slight torsional oscillation also occurs at the rear.
At a speed of 1750 rpm, the torsional oscillation improves, but it does not disappear.
I tried all possible settings, including different rotor blades, without any change in behavior.
The vibrations are minimal.
The helicopter is otherwise flying normally.
Do you have any idea where the problems might lie?
Thank you in advance for your feedback.
greeting
Philippe
Hallo Zusammen,
Betreff: Logo 550 SE mit Regler YGE 95A, Savox Servos, 1st Blätter, Vbar Neo, leichten Kunstflug.
Bei einem schnellen Vorwärtsflug mit einer Drehzahl von 1750 U/min ist ein Resonanzgeräusch deutlich zu hören. Auch mit 1850 U/min wird nicht besser.
Außerdem entsteht bei niedriger Drehzahl (1500 U/min) auch noch ein leichtes Drehpendeln am Heck.
Bei einer Drehzahl von 1750 U/min wird das Drehpendeln besser, aber es verschwindet nicht.
Ich habe alle möglichen Einstellungen ausprobiert, auch mit anderen Rotorblättern, ohne dass sich das Verhalten geändert hätte.
Die Vibrationen halten sich in Grenzen.
Der Hubschrauber fliegt sonst normal.
Habt ihr eine Idee, an welchen Stellen die Probleme liegen könnten?
Für Rückmeldungen danke ich im Voraus.
Gruß
Philippe
Betreff: Logo 550 SE mit Regler YGE 95A, Savox Servos, 1st Blätter, Vbar Neo, leichten Kunstflug.
Bei einem schnellen Vorwärtsflug mit einer Drehzahl von 1750 U/min ist ein Resonanzgeräusch deutlich zu hören. Auch mit 1850 U/min wird nicht besser.
Außerdem entsteht bei niedriger Drehzahl (1500 U/min) auch noch ein leichtes Drehpendeln am Heck.
Bei einer Drehzahl von 1750 U/min wird das Drehpendeln besser, aber es verschwindet nicht.
Ich habe alle möglichen Einstellungen ausprobiert, auch mit anderen Rotorblättern, ohne dass sich das Verhalten geändert hätte.
Die Vibrationen halten sich in Grenzen.
Der Hubschrauber fliegt sonst normal.
Habt ihr eine Idee, an welchen Stellen die Probleme liegen könnten?
Für Rückmeldungen danke ich im Voraus.
Gruß
Philippe
machine-translated from German · Show original