Gambosbk
29 June 2025 20:5329.06.2025 20:53
Hello friends of helicopter sports,
I want to convert my Mikado Logo 10 to an extended tail for fuselage installation. The long tail boom set #2769 from Mikado is no longer available as it's too old. However, I found and ordered the tube from the Mikado shop! I'm still looking for the part number or length of the belt and the part number of the long control rod. Could one of the experts help me with this?
Best regards
Denis and have a nice Sunday everyone
Guten Tag Freunde des Helisport´s,
ich möchte meinen Mikado Logo 10 auf ein verlängertes Heck zwecks Rumpfeinbau umrüsten. Das Set Heckauslegerset lang #2769 von Mikado gibt es ja nicht mehr da er zu alt ist. Aber das Rohr habe ich bei Mikado Shop gefunden und bestellt ! Ich suche noch die Teilenummer vom Riemen oder die Längenangabe von diesem und die Teilenummer von der langen Steuerstange , könnte mir da jemand helfen von den Profi´s .
Liebe Grüße
Denis und einen schönen Sontag Euch allen
Bernhard Kerscher
30 June 2025 06:5130.06.2025 06:51
Good morning Denis,
That should be a 20x620 tube and the 540XL belt (still available in the shop)
Greetings Bernhard
Edited once. Last edited on 30.06.2025 at 08:25 by Bernhard Kerscher.
Guten Morgen Denis,
das müsste ein 20x620 Rohr sein und der 540XL Riemen (gibt es noch im Shop)
Grüße Bernhard
1 mal bearbeitet. Zuletzt am 30.06.2025 08:25 von Bernhard Kerscher.
Gambosbk
30 June 2025 21:1130.06.2025 21:11
Yes, it's ordered. Thank you, Bernhard, you helped me a lot, and the old logo will have a new purpose ;-)
Best regards
Denis
Ja ist bestellt Dankeschön Bernhard , hast mir sehr geholfen und der alte Logo bekommt eine neue Aufgabe ;-)
Liebe Grüße
Denis
Bernhard Kerscher
1 July 2025 06:3601.07.2025 06:36
Good morning,
Please.
Feel free to share how it went and maybe post a photo ;-)
If you need intermediate sizes of straps that Mikado doesn't offer, XL straps are available online in all sorts of lengths.
Greetings Bernhard
Guten Morgen,
bitte gerne.
Du kannst gerne noch berichten wie es gepasst hat und ggf. ein Foto posten ;-)
Wenn du bei den Riemen mal Zwischengrößen brauchst die Mikado nicht hat, die XL Riemen gibt es im Netz in allen möglichen Längen.
Grüße Bernhard
Gambosbk
1 July 2025 21:2901.07.2025 21:29
Hello Bernhard,
Yes, I'd be happy to do that, but unfortunately it will take a while before I can really make progress. My job is keeping me very busy at the moment ;-) but everything is already ordered.
What's the best way to handle the steering rod? Do you have any ideas?
Pictures to follow
Best regards
Denis
Hallo Bernhard,
ja das mache ich gern , dauert aber leider noch ein wenig bis ich so richtig voran komme . Leider nimmt mich zur Zeit der Beruf sehr ran ;-) aber bestell ist alles schonmal.
Wie mache ich das mit der Steuerstange am besten ? Hast Du da vielleicht ne Idee ?
Bilder folgen
Liebe Grüße
Denis
Bernhard Kerscher
2 July 2025 06:3802.07.2025 06:38
Good morning,
I understand that perfectly.
Often you just don't have the "inspiration" to continue building; I've been working on my scaler for four years now and it just won't get finished ;-)
There are several possibilities with the control rods.
It depends on how much space you have in the rear of the fuselage.
- Carbon tube like on a 3D trainer
- Silver steel wire and cut suitable threads on it yourself
- There are also threaded sleeves for brazing.
I would route the whole thing as close to the tail boom as possible, so not with the original clamps but, for example, with small 5cm pieces of Bowden cable tubing/antenna tubes that are simply wrapped around the tail boom with electrical tape.
Greetings Bernhard
Guten Morgen,
das verstehe ich gut.
Oft hat man auch nicht die "Muse" weiter zu bauen, ich baue auch schon 4 Jahre an meinem Scaler und der will einfach nicht fertig werden ;-)
Mit den Steuerstangen gibt es einige Möglichkeiten.
Es kommt darauf an, wieviel Platz du hinten im Rumpf hast.
- Carbonrohr wie bei einem 3d Trainer
- Silbestahldraht und selber passende Gewinde darauf schneiden
- Es gibt auch so Gewindehülsen zum Hartlöten.
Das Ganze würde ich so nah am Heckrohr führen wie es geht, also nicht mit den org. Schellen sondern z.B. mit kleinen 5cm Stücken Bowdenzugrohr/Antennenröhrchen die einfach mit Isoband ans Heckrohr wickeln.
Grüße Bernhard
Gambosbk
2 July 2025 22:0302.07.2025 22:03
Good evening ,
Yes, that's a good idea. I'll try it out with the guide tube on the tail boom, like with the flat model and those solder sleeves for the cable heads.
So, what scale helicopter are you building and what combination are you using?
I'm currently building my first one, it's a Causemann hull, Ranger 600 size, let's see how it turns out, I'm excited, but it will still be a lot of work.
Best regards
Denis Gawlik
Guten Abend ,
ja das ist eine gute Idee , mit dem Führungsrohr am Heckrohr werde es mal ausprobieren wie beim Flächenmodell mit diesen Löthülsen für die Kabelköpfe.
Was baust Du also welchen Scale-Heli und welche Kombi nimmst Du?
Ich baue gerade meinen ersten ist nen Causemann-Rumpf Ranger 600er Größe mal sehen wie das wird bin gespannt, aber wird sich noch ne Menge Arbeit werden.
Liebe Grüße
Denis Gawlik
Bernhard Kerscher
3 July 2025 06:4703.07.2025 06:47
Good morning,
Well, you can't really call it a scaler in my case.
I'm building a mechanism into a Long Ranger hull.
The fuselage is a Hirobo Long Ranger in 30 scale.
This is where a self-assembled mechanism comes in.
Logo 480xx chassis with longer tail tube and belt.
The fuselage is too short for a 550 and too long for a 500 :-) it's more or less a 530.
A construction report can be found here:
https://www.rc-heli.de/forum/hubschrauber-systeme/mikado/199145-logo-480xx-daily-scale Let's see what happens and when.
Best helicopter greetings, Bernhard
Guten Morgen,
na ja einen Scaler kann man das bei mir eigentlich nicht nennen.
Ich baue eine Mechanik in einen Long Ranger Rumpf.
Der Rumpf ist ein Long Ranger von Hirobo in 30er Größe.
Hier kommt eine selbst zusammen gewürfelte Mechanik rein.
Logo 480xx Chassis mit längerem Heckrohr und Riemen.
Der Rumpf ist für einen 550er zu kurz und 500 zu lang :-) das ist so zu sagen ein 530er.
Einen Baubericht gibt es hier:
https://www.rc-heli.de/forum/hubschrauber-systeme/mikado/199145-logo-480xx-daily-scale
Mal sehen was und wann das wird.
Beste Heligrüße Bernhard