Bert62
5 October 2025 14:1305.10.2025 14:13
Hi, my question is: I'm in the process of converting an old Graupner Uniexpert mechanics system to electric. This will then be installed in the fuselage of a Lockheed 286h.
The helicopter still has a paddle system which should remain. Which Mikado receiver will allow me to get telemetry onto the vbar touch?
I was thinking of using the unisens-e and the vstabi RX Only receiver. A VBL receiver wouldn't work with a paddle helicopter, would it? Or what do you think?
Warm regards
Bert
Edited once. Last edited on 05/10/2025 at 14:14 by Bert62.
Servus mein Frage ich bin dabei mir eine alte Uniexpert- Mechanik von Graupner auf Elektro umzurüsten. Diese soll dann in den Rumpf Lockheed 286h.
Der Heli hat noch ein Padelsystem welches auch bleiben soll. Mit welchem Mikado Empfänger bekomme ich die Telemetrie auf die vbar touch.
Ich dachte da an unisens-e und den Empfänger vstabi RX Only Empfänger. Ein vbl Empfänger geht ja nicht mit Paddelheli oder was meint ihr dazu.
Herzliche Grüße
Bert
1 mal bearbeitet. Zuletzt am 05.10.2025 14:14 von Bert62.
Max8200
5 October 2025 14:2005.10.2025 14:20
Hi Bert,
As far as I know, not at all, since VBar and Unisens do not communicate with each other.
Get an Evo or Neo; they can also handle paddling injuries, as described here in detail:
https://www.vstabi.info/forum/read.php?42,155457 If I were you, I'd install an ESC that "speaks" Mikado, then you'll have everything the Unisens-e can do, plus the RPM signal and programming via the transmitter, etc. on top!
VG
Lars
Edited once. Last edited on 05/10/2025 at 14:22 by Max8200.
Servus Bert,
soweit ich weis garnicht da VBar und Unisens nicht miteinander kommunizieren.
Nimm ein Evo oder Neo, die können auch Paddelheil, ist zB hier ganz aktuell beschrieben:
https://www.vstabi.info/forum/read.php?42,155457
Ich würde an deiner Stelle einen ESC einbauen der Mikado "spricht", da hast du dann alles was das Unisens-e kann + Drehzahlsignal und Programmierung über den Sender etc on top!
VG
Lars
1 mal bearbeitet. Zuletzt am 05.10.2025 14:22 von Max8200.
RV
5 October 2025 15:4005.10.2025 15:40
That's exactly how it is.
If you use a receiver-only model with an external gyro AND are willing to create a complete heliprogram in macrocells (it's possible, but I won't support it; it's too complex for the average pilot), you can get the thing flying. But without telemetry.
Do it as suggested - NEO or EV with Heli Pro, gain set to 0, and an ESC with Mikado telemetry. Anything else is - sorry - pointless.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Genau so ist es.
Wenn Du einen reinen RX-Only und externen Gyro nimmst UND Dich mit der kompletten Erstellung eines Heliporgramms in Makrozellen (geht - aber ich werde das nicht supporten, ist zu komplex für den normalen Piloten) kriegst das Ding zu fliegen. Aber ohne telemetrie.
Mach es wie vorgeschlagen - NEO oder EV mit Heli Pro, Gain auf 0, und Regler mit Mikado Telemetrie. Alles andere ist -sorry- sinnlos.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Bert62
5 October 2025 17:4705.10.2025 17:47
Thank you very much, I'll do it that way then. Best regards, Bert
Vielen Dank, dann werde ich das so machen. LG Bert
Bert62
5 October 2025 17:4805.10.2025 17:48
Thank you so much, too. Best regards, Bert
Herzlichen Dank auch dir. Lg Bert