← Logo 400 ... 690

Screws rotor head center piece Logo 600 translated

Mikado Model Helicopters › Logo 400 ... 690 · Started by Christoph68 on 2 March 2026 09:3202.03.2026 09:32
Christoph68 2 March 2026 09:3202.03.2026 09:32
Hello dear Mikado team,

I need your help again: It concerns the M3 x 20 shaft screw used to attach the central piece to the rotor shaft on the various Logo 600 models, and the two M3 x 12 countersunk socket head screws used to clamp the central piece on the L600SE. Unfortunately, I can't find either of these screws in your online shop. I would be very grateful for any assistance!


Warm regards

Christoph
machine-translated from German · Show original
Eddi E. aus G. 4 March 2026 09:0704.03.2026 09:07
Hi Christoph,

M3x20 with 14 mm shank = 94612 (internal number, currently not available in the shop...)
M3x12 countersunk head = 94592 (ditto)

Please send an email to service (at) mikado-heli (dot) de, and we will take care of it.
We can also combine this with a larger order, just let us know _before_ you order ;-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Christoph68 4 March 2026 10:1004.03.2026 10:10
Hi Eddi,

Great, thank you so much for the kind tip. I'll inquire about it then...

Thank you very much and best regards

Christoph
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless