← Logo 400 ... 690

4030 motor for Logo 550SE V2 translated

Mikado Model Helicopters › Logo 400 ... 690 · Started by rolandka on 13 September 2026 14:0413.09.2026 14:04
rolandka 13 September 2026 14:0413.09.2026 14:04
Hello everyone,

I wanted to rebuild my 550SE V2 after a long time.
I found an X Nova Motor 4030 with 1000 KV in my inventory.
Can I use this for the 550SE without major modifications, or should I stick with the tried and tested 4025?
Thanks in advance for all the answers and have a nice Sunday!
Roland
machine-translated from German · Show original
HeliALEX 14 September 2026 07:0214.09.2026 07:02
Hello Roland,

The engine is suitable in principle.
Does the motor have M4 mounting points with a 30mm hole spacing?
The shaft should be either 5mm or 6mm in diameter and approximately 32mm long, then it will fit into the counter bearing.

What is the maximum RPM you want to fly at (with 6S) using a 153T or 106T main gear?
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless