Jock_rst
9 June 2022 23:4909.06.2022 23:49
Hi,
What value from factory for collective and cyclic angles? Can't find these values in the instruction.
Eddi E. aus G.
13 June 2022 09:2913.06.2022 09:29
Hi,
to be honest, I did not take notes :-)
The default settings are what you get when you create a new LOGO 200 setup, using VBar Control or -Touch.
Only parameters changed, individually for each model, are trim values (level swash plate by eyeballing, and adjust for 0° collective by folding blades), and auto trim in a quiet environment (indoors), then let the VBar NEO do what it's designed for.
(I can already hear the cries coming, whaaat, but you must this, you can not that, how dare you ... :-)
But if pilots can do a competition-level piro-tic-toc loop or time machine from -start- to -end- with it, it can't be that bad ... never seen that done with a micro before, but I'm getting carried away ...)
Collective pitch angles are comparatively low if I recall correctly, only like 10-11°, but with lightness there's a dynamic in it which you can not factor in easily, by degrees angle.
Cyclic should be adjusted for approx. 8° as always, but could be that the cyclic gain has ben adjusted, to match the model's characteristics.
Again ... what you get with a new setup is the real deal, it's what we use when setting up and breaking in each and every new model.
Kind regards
Eddi
Born to fly ...
forced to work.
Jock_rst
13 June 2022 16:5013.06.2022 16:50
Eddi E. aus G. Wrote:
-------------------------------------------------------
> Hi,
> Again ... what you get with a new setup is the
> real deal, it's what we use when setting up and
> breaking in each and every new model.
>
Thanks Eddie. I've dissasembly my Logo 200 to replace broken parts, also rod links and plastic links are replaced. Links lenght exactly how it specified in the manual - 10 mm and 28.2 mm