blue
18 August 2022 09:2918.08.2022 09:29
Hi, will you tell me what are the percentage limits in the trims setup on the Logo 200.
Is there a value one must not go over, eg, setting up a Logo 700 (video on youtube) the guy says never to go over (40), and if you find you are over (40), go back and do setup again. My reading are ( -90 -87 +100 ), which seems crazy to me.
I know one of my servos is off ( unhappy with the gap ) when all the servos are forced to their neutral positions, between servo arm and swashplate leveler. The helicopter hovers fine, but i have not flown it yet.
And just on another note, my mini neo has been replaced under warranty, so will i have to go through the same procedure, as in purchasing my Pro/ Rescue features, to retrieve them.
Regards Patrick.
RV
18 August 2022 20:5518.08.2022 20:55
There is only one limit:
Check servo force in end positions in setup mode.
Some Servos will get weak if the pulse width is out of spec - this is the limit ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
blue
20 August 2022 10:4820.08.2022 10:48
Hi Rainer
Thank you for the quick response, problem sorted, all (3) servo link arms too long. Channel 1 (13mm). Channel 2 (12mm). Channel 3 (11mm). Trim readings now are, -40 -30 -10. Good enough for me.
As to the second part of my question, my new mini Neo which was replaced under warranty, obviously needs to have its Res/Pro features reinstalled, am I right in saying, just follow the exact same procedure as if I was switching a license in the Vstabi shop. ( New Logo 200) purchased 20/05/2022.
Regards Patrick.
RV
20 August 2022 11:2520.08.2022 11:25
If it was replaced under warranty you should have a voucher code. Just do as for purchase - there is a field for the code then ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.