← Logo 200

Logo 200 Pro + Rescue settings

Mikado Model Helicopters › Logo 200 · Started by JamesM72 on 2 June 2024 16:2502.06.2024 16:25
JamesM72 2 June 2024 16:2502.06.2024 16:25
Hello All,

I have purchased a second hand Logo 200 which has the Pro Rescue upgrade.
Is it possible / advisable to reset this to the standard configuration?

As a new pilot I’m not comfortable using my touch radio to setup the mini neo and would like the simplicity of the “ready to fly” setup.

Thanks
James
RV 2 June 2024 19:3502.06.2024 19:35
You need to do this 3 steps:

- write down swash servo trims (long press on trim) in setup, write down trim flight valiues in flight menue
- create a new model setup with the logo 200 preset given in VBC
- dial in the named values above again

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
JamesM72 20 June 2024 17:5020.06.2024 17:50
Thank you Rainer, are these settings found once connected to the Logo 200 ?
Do I also need to be connected to the Logo 200 to be able to find create a new model setting on vbarT ?
Eddi E. aus G. 21 June 2024 08:5421.06.2024 08:54
Hi,

you always need to have the model connected which you want to work on.
The model memory _is_ the model, the VBar on the model.

This of course also goes for creating a new setup.

Free yourself from the 'old' :-) thinking that the transmitter itself has model memory—it hasn't.
Actually one of the key benefits of the VBar system, this way, you can share models, buddy box, use different transmitters of your own, even with different stick modes and switch positions, without having to think about transferring model memory or settings, and without the risk of having the wrong model memory loaded.

Kind regards

Eddi

Born to fly ...
forced to work.
VStabi VStabi Pioneer of Flybarless