JDHDienstverlening
27 June 2024 11:0327.06.2024 11:03
Hello,
How to register a Neo mini on a Logo200 with Vbar control clasic.
I buy this Logo200 used with Neo mini on it and would like to register to my account
Neo have no USB so with control manager not possible
RV
27 June 2024 11:1527.06.2024 11:15
It is.
There is a special USB cable at the shop for update etc. when no VBC touch/evo is available. But probably requires to remove the NEO to get access to the servo sockets (unplug servos for cable).
Link to Shop
Or - bind to a touch/evo from a buddy and scan the QR there with your phone ...
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Edited 1 time(s). Last edit at 06/27/2024 11:16AM by RV.
JDHDienstverlening
27 June 2024 11:1827.06.2024 11:18
Thx Rainer,
My buddy have a Touch so do it through him his touch with scan QR
Thanks