← Logo 200

Logo 200 Version 2025 translated

Mikado Model Helicopters › Logo 200 · Started by MarkusS on 26 March 2025 22:0426.03.2025 22:04
MarkusS 26 March 2025 22:0426.03.2025 22:04
Hello Mikado team,

The shop contains the category Logo 200 V8 2025.

Unfortunately, there is no model listed there that can be purchased?

Will there be a new, technically modified model of the currently available Logo 200 (possibly a different one)?
(Controller, motor, etc.) or should one simply buy one of the current Logo 200 bnf with VBar Neo Micro and expect a software update for that model later?

Thank you for your feedback :-)

LG
Markus



Edited once. Last edited on March 26, 2025 at 10:04 PM by MarkusS.
machine-translated from German · Show original
Eddi E. aus G. 27 March 2025 09:0327.03.2025 09:03
Hi Markus,

It's ready to go, just waiting for the final release of the V8 firmware for VBar EVO.

. LOGO 200 as known
VBar EVO micro V8
. Controllers with built-in telemetry

I can't personally test its flight characteristics, but what pilots who have flown this size model back-to-back have reported has been extremely positive. It was also demonstrated on ROTOR Live in the aviary: impressively sporty and demanding 3D aerobatics in a very confined space, but it always felt somewhat 'all over the place', compared to absolutely controlled and repeatable.

To answer the question in advance, it may take some time before the controller (probably sooner) and the EVO micro are available as spare parts.
When considering a conversion, one must also consider which servo connectors are available.
The 200 series with NEO mini servos have standard servo connectors, so I'd have to reconnect all of them or even replace the servos. The NEO micro already has JST connectors like the EVO micro, so it would be simple.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
MH 27 March 2025 12:2027.03.2025 12:20
Good bye,

Does that also mean that there will be no update to v8 for the NEO micro, but only for the EVO series?

cu /Max
machine-translated from German · Show original
Eddi E. aus G. 27 March 2025 13:4027.03.2025 13:40
Hi Max,

That's right.

V8 requires EVO (normal or micro).

The NEO will remain at version 7.x, just like older devices at 5.3.4 (for third-party transmitters) or 6.0 (VBar Control).

However, version 7.x can still be used on EVO, e.g. with external transmitters—VBar Control is also required for the V8.

Updates to Pro/+Rescue will remain with VBar NEO, for example, and are not transferable. Exception: In a service case, if a VBar is defective and needs to be replaced, then we can discuss this further.

For users of version 7.x Pro/+Rescue, V8 will currently be a free update; those coming from older devices or from 7.x Express... know the drill :-)

And one more thought from me personally: don't be swayed by the – I'll call them 'affectionate' – beggars when buying used cars (yes, I'd take it as an _Express_, but _that_ expensive, I don't need it... nor by all the other nonsense, I'm a student, I don't have much money, but I want to drive a Ferrari...). In reality, most people end up upgrading anyway and haven't saved a thing. The license is practically non-negotiable, you won't find it cheaper used anywhere else... and so it's just a pass-through expense; if you don't get ripped off, it doesn't cost anything extra.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
MH 27 March 2025 14:1327.03.2025 14:13
Thanks! :-)
machine-translated from German · Show original
Sbahzad 1 April 2025 12:5301.04.2025 12:53
Can I install the neo micro fbl or evo micro fbl on omp m2 evo?
machine-translated from German · Show original
Eddi E. aus G. 1 April 2025 13:1301.04.2025 13:13
Hi,

if you have one :-) or both, actually ^^
And of course if the servo connectors fit (JST XH 1.5 mm on NEO/EVO micro).

—Eddi

Born to fly ...
forced to work.
Sbahzad 1 April 2025 15:3401.04.2025 15:34
Where can I buy the neo/evo micro fbl? Can't find it on any website .

Thanks
Wingtip 1 April 2025 21:5801.04.2025 21:58
You can Order the Neo Micro only in Combination with an Logo 200 to.

So the only way to get an Neo Micro is to pick up from the Logo and install in the OMP
Eddi E. aus G. 2 April 2025 09:0102.04.2025 09:01
Hi,

it'll be superseded by EVO micro soon anyway. This one's supposed to be sold separately, then, too.
No timeline yet, it'll only happen after firmware V8 for VBar EVO has been released.

Kind regards

Eddi

Born to fly ...
forced to work.
Sbahzad 2 April 2025 18:4402.04.2025 18:44
It will be great to upgrade my logo 200 trainer fbl to the new e o micro aswell
Wingtip 6 April 2025 22:2006.04.2025 22:20
Eddi E. from G. wrote:
-------------------------------------------------------


To answer the question in advance, it's possible that...
It will take some time until the regulator (presumably)
(> earlier) and the EVO micro also as a spare part
> exists.

> Greetings
>
> Eddie




It would be desirable to be able to buy the small stabilizers as a "single" device.
This option has never existed before!!! and would be a nice move by Mikado.
For converting existing Logo 200 helicopters or as an upgrade for third-party helicopters such as OMP MK1 or MK2.

Back in the Neo Mini days, when I asked if the Neo Mini was also available for purchase separately, I received the following answer:

You can buy it - but it always comes with a "200" logo attached... that wasn't quite my sense of humor.
machine-translated from German · Show original
Eddi E. aus G. 7 April 2025 09:0807.04.2025 09:08
Good morning,

Well, that's how it's been so far, humor or not :-)

When you only get a limited number of components (during this lousy pandemic, VBar NEO in general), you have to be careful with your resources.
Otherwise, you might not be able to equip your own LOGO 200 product at some point, there is a risk that there will be no NEO mini available at all or only temporarily, and no successor.

I've heard that the EVO micro will actually be available individually, but I'm not making any promises here :-)
That will be decided elsewhere...

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Mani93 15 April 2025 20:5415.04.2025 20:54
Eddi E. from G. wrote:
-------------------------------------------------------
Hi Markus,
>
He's ready to go, just waiting until
> The V8 firmware for VBar EVO has been finally released
> is.
>
> . LOGO 200 as known
> . VBar EVO micro V8
> . Controllers with built-in telemetry
>
I cannot personally assess that from a flying perspective.
> but what pilots have reported who flew the model in
> of the size also flown directly one after the other
The experience was extremely positive. It was on ROTOR.
I also saw it live in the aviary; it was impressive.
> Sporty, hard-hitting 3D in a confined space, but feels
> always something 'all over the place', vs. absolutely
> controlled and repeatable.
>
To answer the question in advance, it's possible that...
It will take some time until the regulator (presumably)
(> earlier) and the EVO micro also as a spare part
> exists.
> When considering a conversion, one must also
> see which servo connectors you have.
> 200 series servos with NEO mini have standard servo connectors, since
Would I have to 'replug' everything, including the servos?
> swap. NEO micro already has the
> JST connectors like the EVO micro, that would be
> simple.
>
> Greetings
>
> Eddie

And will the Logo 200 VBar EVO micro V8 also come with pro/rescue?
When will it be our turn?

Regards
machine-translated from German · Show original
Eddi E. aus G. 16 April 2025 08:5916.04.2025 08:59
Good morning,

V8 is a Pro or Pro+Rescue.
So, as things stand now, at least Pro, I don't know anything more than that yet.

If you're thinking, "Wait a minute...?"... you're right: As things stand, V7 Express will remain the default version for stabilizers purchased separately. With the Pro update (or Pro+Rescue), it will become V8, or V8 will be available as an option. You could also continue using V7 if you prefer it for some reason, or for comparison purposes.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Mani93 16 April 2025 11:3316.04.2025 11:33
Okay, so there's no schedule for when it will be released?
Any other improvements to Logo 200?

Regards
machine-translated from German · Show original
Eddi E. aus G. 16 April 2025 11:5916.04.2025 11:59
Hi,

We have no plan :-) We'll tinker until it's finished :-)
In principle, it's finished; there are just a few wrinkles to iron out and everything else to finalize (settings apps, help systems, graphics, languages, etc.), which is also running in parallel and is being continuously tested.

> Other improvements to Logo 200?
>> . Controllers with built-in telemetry

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Mani93 16 April 2025 13:1416.04.2025 13:14
Okay, very nice.

I'd like to help you test this as a consumer.

Regards



Edited once. Last edited on 16.04.2025 at 13:14 by Mani93.
machine-translated from German · Show original
Eddi E. aus G. 16 April 2025 13:1816.04.2025 13:18
:-) I think everyone would.

But it's already exhausting enough to keep the whole flock of chickens on track, to get what you want or need, and to 'beat' everyone through every major update round.

In the end, many people just want to have, then you don't hear or see anything anymore, unless something breaks.
But the fact that, for example, you have to delete everything, update it, and start from scratch every now and then (and promptly, not just when you feel like it), and give qualified feedback again, because that's what it's all about...
Just examples...

Noooo ;-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Mani93 16 April 2025 13:2816.04.2025 13:28
I understand^^
machine-translated from German · Show original
PWeber 2 May 2025 09:3402.05.2025 09:34
Good morning.

The shop says "Available now", but nothing else (details, price, delivery times).

When will it be available to order?

LG
machine-translated from German · Show original
Wingtip 3 May 2025 13:1203.05.2025 13:12
As has been written many times before, when the V8 is officially released, the L200 will also be available with the V8.
I'm waiting for it too...

They should really remove that banner from the homepage. In my opinion, it only frustrates customers.
They make a fuss and nothing comes of it...it's annoying. If I may put it that way.
machine-translated from German · Show original
Pit100 28 May 2025 12:1728.05.2025 12:17
Is there any news about the release yet?



Edited once. Last edited on 28.05.2025 at 12:17 by Pit100.
machine-translated from German · Show original
Eddi E. aus G. 28 May 2025 14:2428.05.2025 14:24
Nope.

Born to fly ...
forced to work.
machine-translated from German · Show original
Lennart 2 June 2025 09:2202.06.2025 09:22
Good day,

Is it intentional that the German and European shops are currently unavailable?

Best regards
Lennart
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless