← Logo 200

Logo 200 V8 with normal size Vstabi Evo translated

Mikado Model Helicopters › Logo 200 · Started by Zalo on 12 November 2025 20:4012.11.2025 20:40
Zalo 12 November 2025 20:4012.11.2025 20:40
Hello everyone,
I recently became the proud owner of a new Logo 200 V8. It flies really well. I still have an older Logo 200 lying around at home, essentially as a "spare mechanic." I also have a regular Vstabi Evo with rescue gear. I think I read somewhere that if you unpack the Evo, it would fit under the Logo 200's canopy. That gave me the idea of building a second spare Logo 200 V8. My question is, if I create a Logo 200 setup on the regular Vstabi Evo using the setup wizard, will I get the same functions as the one on the newly purchased Logo 200 V8, or are there any differences or things I need to be aware of?
Many thanks in advance & best regards
machine-translated from German · Show original
RV 12 November 2025 21:3712.11.2025 21:37
The V8 Wizard does not differentiate between EVO and Micro EVO.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Zalo 12 November 2025 21:4712.11.2025 21:47
Great, thanks for the quick and positive feedback!
machine-translated from German · Show original
Zalo 12 November 2025 22:5912.11.2025 22:59
Unfortunately, my rear motor isn't turning. What are the correct settings for the old Mikado ESC and a Vstabi Evo? The untouched setup mentions something about a Dshot.
machine-translated from German · Show original
RV 12 November 2025 23:0812.11.2025 23:08
I think that's a mid-pulse of 1500µs. I believe the heart rate is 333 Hz. But I could be wrong and it might be 760µs; I can't test it right now, I'm traveling this week.

=> Please test carefully. Ideally, move the model without the rear motor connected, then restart it with the rear motor connected and secure it against rotation (hold it, but do not injure yourself!).

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
Zalo 12 November 2025 23:1712.11.2025 23:17
Unfortunately, neither of those worked :-(
machine-translated from German · Show original
Zalo 12 November 2025 23:3712.11.2025 23:37
It works! It was error 40... I was sitting 40cm in front of the transmitter. Thanks for the support :-)
machine-translated from German · Show original
thomas1130 13 November 2025 06:1313.11.2025 06:13
Could you perhaps post a photo of your installation solution here?

Thanks!

LG
machine-translated from German · Show original
Jurrien Saelens 13 November 2025 08:2413.11.2025 08:24
Remove all rotor blades, because the motor will start to spin if the limiter is not set correctly!

These are my settings; the tail gain needs to be a bit lower because the old ESC doesn't have DShot. But otherwise I'm very happy – it flies really well and the tail is finally okay after five years!

The only problem: the canopy no longer fits. Luckily, the canopy from the Goosky S2 Max (also 10 grams lighter) fits perfectly over the larger gyro. An added bonus: you can change the LiPo battery without removing the canopy.



Edited once. Last edited on 13.11.2025 at 08:34 by Jurrien Saelens.

machine-translated from German · Show original
thomas1130 13 November 2025 08:5913.11.2025 08:59
What is "DShot"?

Thanks
machine-translated from German · Show original
Jurrien Saelens 13 November 2025 09:1313.11.2025 09:13
DShot is an alternative ESC protocol that offers several advantages over PWM: lower latency, increased robustness through a checksum, and no need for ESC calibration because the protocol uses digital encoding.

It would be great if Mikado and/or OMP would provide a new firmware for this. Technically, I think that might be possible, since I was previously able to upgrade the old ESC controllers of my quadcopters to DShot using my Betaflight flight controller.



Edited twice. Last edited on 13.11.2025 at 09:32 by Jurrien Saelens.
machine-translated from German · Show original
thomas1130 13 November 2025 10:3013.11.2025 10:30
Thanks for the info :-)

So, a digital protocol between the receiver (FBL) and the controller, instead of the analog PWM signal...

I'd never seen anything like it before.

Best regards,
Thomas
machine-translated from German · Show original
Eddi E. aus G. 13 November 2025 11:0713.11.2025 11:07
Good morning,

a-hem ... V8 has DSHOT150 at 500 Hz and DSHOT300 at 1,000 Hz.
It is used, for example, in the LOGO 200 V8 with the new telemetry controller.

However, I doubt that the existing controller is updateable.

Just so you know.

Grüßle

Eddi

Born to fly ...
forced to work.



1 mal bearbeitet. Zuletzt am 13.11.2025 11:08 von Eddi E. aus G..
machine-translated from German · Show original
Zalo 18 November 2025 21:1818.11.2025 21:18
Hi, I haven't yet found a usable installation solution with a standard Evo without removing the stabilizer bar, which I won't do. Best regards
machine-translated from German · Show original
Zalo 21 November 2025 23:4821.11.2025 23:48
Hi everyone, I've found a solution that works for me. I unpacked the ESC, shrunk it in place, and mounted it on the Evo. It fits under the original cowl. First flight is still pending. Best regards

machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless