← Logo 200

LOGO 200-V8 Bind&Fly Combo, blue translated

Mikado Model Helicopters › Logo 200 · Started by linken98 on 14 January 2026 21:3814.01.2026 21:38
linken98 14 January 2026 21:3814.01.2026 21:38
Hi, I'm thinking of getting the helicopter. I have the first VBar control; will it work with that? Also, I'm wondering if there was a training function with a landing pad back then, as far as I remember, to practice in a certain area without crashing. Does that still exist? Greetings from Tyrol!
machine-translated from German · Show original
Eddi E. aus G. 15 January 2026 09:0615.01.2026 09:06
Good morning,

You can bind and fly the LOGO 200 V8 with the Classic, but you can no longer make any settings.
V8 only works fully with VBar Control Touch or EVO/+.

If you are happy with the Classic and want to stick with it, I would recommend the non-V8.
The current bundle even includes the rescue function, and therefore also the beginner mode, which is essentially a trainer but without virtual airspace limitations and a safety net. Nevertheless, you can practice quite safely with the self-leveling and roll angle limitation if you can already hover, take off, and land reasonably well.

Then there's the trainer as a set (just take a look in our shop).
However, they are currently frequently sold out, and although we are constantly producing new ones, it can take some time.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
linken98 15 January 2026 09:4115.01.2026 09:41
Thanks, is there any other difference in the stabilizer between the Logo 200 and the Logo 200 V8?

Then I have another question: which VBars still work with the first generation VBar Control?

Thanks so much
machine-translated from German · Show original
Eddi E. aus G. 15 January 2026 11:4415.01.2026 11:44
Hi,

LOGO 200:
The VBar NEO micro and first-generation controllers require an external current/voltage sensor for telemetry.
V6 (NEO) Firmware, currently bundled with Pro+Rescue.

LOGO 200 V8:
VBar EVO micro and 2nd generation controllers with integrated telemetry,
V8 (or after downgrading to V7 also fully compatible with Classic) (EVO) Firmware, currently bundled with Pro.

All firmware versions up to V7 can be configured with the Classic.
V8 (only available for VBar EVO) then only with Touch or EVO.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless