← Logo 200

Logo 200 V8 - Update Controller translated

Mikado Model Helicopters › Logo 200 · Started by martin_fuerst on 17 May 2026 21:5317.05.2026 21:53
martin_fuerst 17 May 2026 21:5317.05.2026 21:53
Good bye,

I have the latest updates on my Logo 200 V8 with MicroEvo.
I did it and only then watched the recording of the last VTV...

Now I have some questions:

- Is the helicopter safe to fly even without an ESC update, or not really?

- Send it in for an update or create a service case beforehand - but there I can find information under
Can I only select a NEO for my L200V8 model (component)? - and of course not a controller update either.

So what's the best way to proceed?

LG
Martin



Edited once. Last edited on 17.05.2026 at 22:02 by martin_fuerst.
machine-translated from German · Show original
RV 17 May 2026 22:1717.05.2026 22:17
1 - Yes, but you need to reconnect the "old" main/tail rotor controls if you have a new setup.
2 - Simply select "Other" in the first form.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
martin_fuerst 18 May 2026 10:3218.05.2026 10:32
Thanks Rainer - all clear!
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless