← Logo 200

Check and update the Logo 200 V8 controller version. translated

Mikado Model Helicopters › Logo 200 · Started by Orpheus on 30 June 2026 20:4030.06.2026 20:40
Orpheus 30 June 2026 20:4030.06.2026 20:40
Hello guys from Mikado or to everyone who has already installed the ESC controller of the L200 V8 to software version 1.9.

I think it's great that users can now update their L200 V8 to the latest version themselves.

I've acquired everything necessary, built the corresponding update cable, installed the latest update on the VBC EVO+, the latest update on the micro VBar (8.2.40), and the SunnySky app on my iPhone... all the latest versions...

I can connect to the ESC controller via the SUNNYSKY app, retrieve the software version 1.4, and view all parameters.

What I CAN'T do or FIND is the new version 1.9 that's needed :-/
Neither on the SUNNYSKY app nor under Support Software Updates on the official OMP Hobby homepage.

Did I miss something, or where can I download and extract ESC version 1.9?

Please help :-)

Dietmar



Edited once. Last edited on 30.06.2026 at 20:42 by Orpheus.
machine-translated from German · Show original
martin_fuerst 30 June 2026 22:5430.06.2026 22:54
Hello Dietmar,

There, in the description, under the picture with the cables, is...
The link can be found here: https://www.vstabi.info/de/l200esc

Martin



Edited once. Last edited on 30.06.2026 at 22:57 by martin_fuerst.
machine-translated from German · Show original
Orpheus 1 July 2026 06:2201.07.2026 06:22
Hello Martin,
Thanks for your help, I was really a bit "blind" there :-)
I've already downloaded it and everything worked.
Testing begins this evening :-)

Regards, Dietmar
machine-translated from German · Show original
Eddi E. aus G. 1 July 2026 09:3001.07.2026 09:30
Good morning,

Due to a recent customer inquiry last night, I have just linked the current setup in the Preset section and added a link to the latest information and the latest firmware update.

At the moment, there's still some conflicting information and versions.

Perhaps this much more:

Anyone who purchased their LOGO 200 V8 directly from us after June 1, 2026, almost certainly already has an updated controller (from the factory). This can be identified by a black sticker on the right side of the controller, next to the rear motor cables.
The current setup is also installed there, but _not yet_ adapted to the 'very latest' firmware update ( link ).

Purchased by the end of May 2026 or during the transition period from a retailer: the controllers may still be running the older software version. The identifying feature – that's right – is the black sticker.

Our offer to send in the helicopter for an update at the time of release is of course still available.

LOGO 200 with VBar NEO mini or micro (Firmware V6.x) and with the original controller cannot benefit from this, or the controllers are not updateable, simply because the connections are missing.

Previous V7/V8 setups, even lovingly optimized ones, are very likely to perform worse with the current 8.2 than our current basic setup.
Why?
Where previously you might have used governor and tail settings to achieve certain effects or maneuvers "against the grain," the current VBar firmware, in conjunction with the current ESC firmware, now handles this automatically and differently. The earlier optimizations may no longer be relevant or may need to be re-established through flight testing.

That's all for now – just ask if you have any questions :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Orpheus 1 July 2026 10:3001.07.2026 10:30
Hi Eddi,
Now I'm a little unsure!!!
I have now carried out everything as described, as of yesterday, June 30th, all points.
I also downloaded and installed the ESC version "Vbar-1.9.sqlite3".
Now, with your latest change, there is a different version: "ESC FW New LOGO 200".
Do I need to readjust the controller with this version, or would they both be the same?

Could you please briefly explain this to me?

Greetings, Dietmar
machine-translated from German · Show original
Eddi E. aus G. 1 July 2026 11:1401.07.2026 11:14
Hi Dietmar,

They are the same. They should be the same...

I loaded what I currently have (in a developer version) in the transmitter, which we currently use to program the helicopters, onto an EVO VLink and saved it.
When the developer version becomes the customer version, everyone automatically has it in the selection for 'New Helicopter'.
It may or probably even be adjusted to reflect the possible changes in the release notes, which currently have to be manually implemented (see: optimizer, torque extension).

Things are still a bit fluid at the moment :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Orpheus 1 July 2026 11:4401.07.2026 11:44
Hi Eddi,

Just so that we both don't misunderstand each other

I have updated the VBC EVO+ to the latest version.
Micro VBar also receives update 8.2.40
Presetup Logo 200 loaded (as of yesterday, June 30th)
The previous trim values were restored.
The setting in the setup menu was also set to Logo 200.
And the optimizer values were adjusted: A=30 B=20 , …

But the ESC update installed VBar-B1.9sqlite3 and not the current ESC firmware, new LOGO200.

I hope everything is correct now, because I'd like to avoid another update and having to start all over again :-/

Dietmar
machine-translated from German · Show original
Eddi E. aus G. 1 July 2026 11:5701.07.2026 11:57
Hey Dietmar,

Ah, apples and oranges, or rather, our talent for naming things as ambiguously as possible... or for misunderstanding each other.

VBar-B1.9sqlite3 <- the firmware for the controller, check

ESC FW new LOGO 200 <- the current LOGO 200 setup that can be loaded from VBar Control onto the EVO micro

But it wasn't actually that ambiguous ^^

Quote: me
I just linked the current setup in the Preset section.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Orpheus 1 July 2026 12:1801.07.2026 12:18
Oh Eddi,
That's a whole fruit salad, not just pears and apples!
Now everything is clear, I understand everything :-)

It's all ok
:-)
Dietmar
machine-translated from German · Show original
martin_fuerst 7 July 2026 14:5007.07.2026 14:50
Hello,

One more small tip from me regarding the information page
>> Select BT module 'BLE-0148' (scroll if necessary)

The module has different numbers, but begins with BLE-xxxx

It's logical anyway, but just to be on the safe side and don't despair.
if BLE-0148 doesn't appear :-)
machine-translated from German · Show original
Eddi E. aus G. 8 July 2026 08:5208.07.2026 08:52
Good morning,

Thanks! I'll add it right away.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
martin_fuerst 10 July 2026 20:5810.07.2026 20:58
Hi Eddi, Rainer

- Logo200V8 reset tools

I noticed that when changing the basic setup (reset tools), e.g., from normal to sporty 3D or to professional 3D from a perfectly functioning basic setup (Logo200 new), the following values are displayed:

Lightness (20/10/8)
Shaking filter (11/11/11)
Torque extension (25/30/35)
---
Extended rear:
I Limit / Preload (10/10/15)
Differential (10/10/10)

All are set to the value (0/0/0),
or are not adopted correctly!

Please check this, there might be a mistake!

LG
Martin



Edited 7 times. Last edited on 11/07/2026 at 22:12 by martin_fuerst.

machine-translated from German · Show original
Eddi E. aus G. 13 July 2026 09:1913.07.2026 09:19
Hi Martin,

Not a mistake at first, but... not provided for in the special case of 'microheli with rear motor'.

The three presets work with 'normal-sized' models with pitch-controlled tail rotors, within the framework of the basic setup, and to try out different approaches. Once you've manually adjusted the settings, these changes, which might even be extremely beneficial for your own model, will be lost again and would need to be readjusted or modified.

With a 'normal' helicopter, lightness isn't usually built in (though it's possible and pretty cool...), you adjust the jitter filter as needed, and there's no torque extension. The same generally applies to extended (very model- or pilot-specific) optional parameters.

The LOGO 200 actually has three banks 'Mild-Medium-Wild' as starting points, where you can then work with agility/turning rate, steering behavior and speed, and possibly do even more (8.2 Tips).

To what extent this could be meaningfully changed, I don't know... then one would have to individually test and implement the whole thing for each Stratos model, and always update the changes after every modification... even there I would always use the preset developed by the XLP team as a template, and continue working with that, saving good intermediate versions if necessary.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
martin_fuerst 13 July 2026 12:0113.07.2026 12:01
Hi Eddi,

This situation cannot continue for inexperienced pilots, because every Logo200V8 owner can
Selecting it now will render the aircraft unflyable!

A "flight" before/after reset to sporty 3D - filmed quickly today without any claim to anything.

Short test flight ok

Test flight after reset sportl3D



LG
Martin



Edited once. Last edited on 13.07.2026 at 12:02 by martin_fuerst.
machine-translated from German · Show original
Eddi E. aus G. 13 July 2026 13:2413.07.2026 13:24
Wow :-) not even Jamie Robertson cracked it like that...

I'm curious how we'll get this off the ice... but I agree with you, what can be clicked on gets clicked, and without any qualms, why should it?, and not everyone stays cool about it and simply puts the thing back down.

Grüßle

Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
Eddi E. aus G. 13 July 2026 14:1213.07.2026 14:12
Hey,

I'm currently going through my emails, and it seems like something's in the works, final setup and reset in the flight panel :-)

Stay tuned!

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
martin_fuerst 4 August 2026 11:2704.08.2026 11:27
Hi Eddi,

Is there any news on the final setup, what about the reset panel?
regards?
It shouldn't stay like this... Thank you!

LG
Martin
machine-translated from German · Show original
Eddi E. aus G. 4 August 2026 13:3804.08.2026 13:38
Good morning,

Not that I know of.

My last information on this is still from back then.

I'd like to get that done too, but I can't do anything about it right now :-/
Unless you ask at the next opportunity, of course :-)

—Eddi

Born to fly ...
forced to work.
machine-translated from German · Show original
martin_fuerst 4 August 2026 16:3904.08.2026 16:39
Thanks - all clear :-)
machine-translated from German · Show original
martin_fuerst 11 August 2026 13:5411.08.2026 13:54
Hello,

Was this included in the latest updates, both yesterday and today?
( L200V8 final setup and reset in flight panel)

LG
Martin
machine-translated from German · Show original
RV 11 August 2026 14:4311.08.2026 14:43
That was already included last week.

Resets have been disabled; this is now the case for all rear-engine helicopters because it's too complicated. There are presets available.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless