← Logo 200

Bought a Mikado Logo 200 trainer, rear motor gets hot and smokes, bought a new one, same problem. translated

Mikado Model Helicopters › Logo 200 · Started by Casselyd on 6 November 2026 22:2706.11.2026 22:27
Casselyd 6 November 2026 22:2706.11.2026 22:27
Hello everyone,

I bought a used Mikado Logo 200 helicopter including trainer.


Battery connected, then the rear motor started smoking. I switched it off immediately and let it cool down.
Tried again. Same problem. Disconnected the motor; everything else seems to be working.

I bought a new motor, connected it, and the motor gets hot immediately.
When I tried to start it, the engine sputtered. I turned it off immediately.
What could the problem be?

Thanks
machine-translated from German · Show original
RV 6 November 2026 22:3006.11.2026 22:30
Hello,

I've moved the post to the correct forum. GLOGO was definitely overkill here.

If the motor is/was working properly, the problem could only be with the cable or the speed controller. If the cable is okay, the speed controller would be the likely culprit.

regards (EN) / Gruss (DE)

Rainer Vetter

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.

Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless