← GLogo 690

Fuel tank

Mikado Model Helicopters › GLogo 690 · Started by leonard on 17 February 2019 22:4317.02.2019 22:43
leonard 17 February 2019 22:4317.02.2019 22:43
Hi,
Can not get the glunk in to the fuel tank
Hole is to small.
I am missing something?
Thx
Brandon Gaither 18 February 2019 03:1418.02.2019 03:14
Try this...

Install the vent first

Assemble the clunk through the tank grommet as shown in the picture

Feed the clunk inside the tank

Install/seat the grommet in the tank

Push nipple through the grommet

dahlkyle 18 February 2019 06:3418.02.2019 06:34
As Brandon said is correct!

Thanks Brandon for helping out!

KD
leonard 18 February 2019 06:5318.02.2019 06:53
I understand how you do it(it is the same way as I do)
But the outside diameter of the clunk is bigger than de diameter of the hole in the tank with no rubber in it.
Lucky me I hade the lyncks one laying here that is the same like on the picture above.
The 2 that came with my glogo are bigger.
dahlkyle 18 February 2019 21:4318.02.2019 21:43
The Fuel magenets all come from SAB, and they should all be the same. It is tight but it will fit in. The felt can compress and will fit inside.
leonard 19 February 2019 07:0419.02.2019 07:04
Ok thx four replying Kyle.
mxracer365 3 March 2019 20:1003.03.2019 20:10
dahlkyle Wrote:
-------------------------------------------------------
> The Fuel magenets all come from SAB, and they
> should all be the same. It is tight but it will
> fit in. The felt can compress and will fit inside.

mine and a friends didnt even come with fuel line or clunk.. were they supposed to?
Rctintin 19 March 2019 01:2619.03.2019 01:26
Hi, yes all kits should have a SAB clunk in the kit.
mxracer365 19 March 2019 04:0219.03.2019 04:02
yea I bought 2 kits, and my friend got 1 all no clunks
o well . just thought that would be standard for a tank.
VStabi VStabi Pioneer of Flybarless