← GLogo 690

Glogo starter axel stuck

Mikado Model Helicopters › GLogo 690 · Started by Sami.L on 17 March 2019 15:1117.03.2019 15:11
Sami.L 17 March 2019 15:1117.03.2019 15:11
Hi all.

Today I finally maidened my glogo. Need some tuning, but everything looking promising.

One problem i find my glogo. My starter saft keeps spinning after I fire up motor. Feeling that starter oneway bearing it's not totally stuck but enought that axel keeps spinning and it's terible to start the engine becouse motor start rotate starter too. Anybody have idea what causes this. Thanks!
dahlkyle 18 March 2019 20:3618.03.2019 20:36
Hi Sami,

We noted that on some of the production kits the diameter of the start shaft and couplers is a bit tight. This makes the diameter of the start shaft slightly big which makes it a bit tight in the clutch one way bearing. I had one customer like this who said that he took some fine sand paper and sanded down the start shaft diameter till it was a little smoother.

At the moment we are working towards finding a absolute solution, hopefully we hear back from our machinist soon.

Kyle
Sami.L 22 March 2019 06:2322.03.2019 06:23
Hi Kyle,

Thanks for reply. Yeah I sanded it and that did the trick. Its better now.

-Sami
bobc1@live.com 1 July 2019 23:2401.07.2019 23:24
I definitely have the same problem. I spent a lot of time with alignment and polishing the starter shaft bearing race in an attempt to free up it up from the one way clutch bearing without success.

The diameter of the starter shaft race is 9.95mm. Have you come up with any soiution/smaller diameter to free up the start shaft from the clutch?

The start shaft can be turned independently of the clutch but it is very tight and will undoubtedly spin while the engine is running.

Thank you,
Bob
VStabi VStabi Pioneer of Flybarless