← GLogo 690

Glogo Canopy Fitting

Mikado Model Helicopters › GLogo 690 · Started by bobc1@live.com on 3 July 2019 04:3403.07.2019 04:34
bobc1@live.com 3 July 2019 04:3403.07.2019 04:34
Does the GG canopy have to be trimmed where it slips over the front landing gear struts? It needs to slide more rearward about 3/8" to allow the rear mounting grommets to align with the mounting posts.

Thanks for any info,
Bob

EDIT: I elongated the bottom slots on the canopy where it captures the main gear struts 10mm. Fits perfect now.



Edited 1 time(s). Last edit at 07/03/2019 06:42AM by bobc1@live.com.
Eddi E. aus G. 3 July 2019 08:5203.07.2019 08:52
Hi Bob,

it's well possible that you may have to trim the canopy a bit, to make it a perfect fit. They are handmade and rather a tight fit, which is better than loose.

Kind regards

Eddi

Born to fly ...
forced to work.
HelisRock! 20 July 2019 03:4320.07.2019 03:43
I'm sure every build is a bit different, but on mine I dremeled the front slits and the top to better access the starter cup.
VStabi VStabi Pioneer of Flybarless