nickwap
3 September 2015 19:4903.09.2015 19:49
I'm getting the hang of Macrocells (maybe)
What would be the correct way of programming Flaperons,
I want to achieve this function.
Bank 2 or Bank 3 Not in Bank 1
Switch to put a small amount of UP Flaperon (to stabilise for Harriers)
Thanks Nick
RV
3 September 2015 19:5203.09.2015 19:52
Whic VBar is it? neo or Silverline or Mini?
Can you please tell us a bit more about the plane?
Which one?
A photo?
The current setup file (Plane and Makrocells)?
Does it have Flaps too?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
nickwap
4 September 2015 18:4404.09.2015 18:44
I'm not at home right now, but it is the same plane that you helped me set up Smoke and Ignition on and I have installed the same setup as the video.
Neo with VBC
No Flaps
1 servo per aileron
I want to achieve a mix so that I can raise the ailerons by a small amount activated by one switch .
It could have 2 values
and would still preserve the function of the ailerons.
I'll post a pic and set up file when I get home
I have used this before to improve low speed flight control
Nick
1 mal bearbeitet. Zuletzt am 04.09.2015 18:45 von nickwap.
RV
4 September 2015 22:0104.09.2015 22:01
Ah ok - i'll try ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
RV
4 September 2015 23:2604.09.2015 23:26
Added here:
http://www.vstabi.info/forum/read.php?47,137189,138074
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.