Maik1702
29 December 2025 16:5429.12.2025 16:54
Hello,
VBar EVO flashes blue-red after the update from 8.1 to 8.2, but is recognized in the Control Manager.
The EVO Express and the V7 install the stabilizer.
Serial No. 27006416
What could it be?
Regards, Maik
Hallo,
V-Stabi EVO blinkt nach Update von 8.1 zu 8.2 blau-rot, wird aber im Control-Manager erkannt.
Die EVO Express und die V7 installiert das Stabi.
Serien Nr. 27006416
Was könnte es sein?
Gruß Maik
RV
29 December 2025 20:5829.12.2025 20:58
How was the update performed?
OTA or USB
Can you connect to it with 8.2 and possibly check the log?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Wie wurde das Update gemacht?
OTA oder USB?
Kannst Du sie mit 8.2 connecten und ggf. im Log schauen?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Maik1702
29 December 2025 22:3729.12.2025 22:37
Hello Rainer,
I performed the update OTA. I cannot connect to you.
Then I tried it via USB through the manager, and it shows me version V.8.2 in the manager, but I still can't connect.
The Express version and V7 enable connection to the EVO.
Regards, Maik
Hallo Rainer,
das update habe ich OTA gemacht. connecten kann ich Sie nicht.
Dann habe ich es über den Manager per USB gemacht und da zeigt er mir die V.8.2. im Manager an aber verbinden geht immer noch nicht.
Mit der Expressversion und V7 geht die Verbindung mit der EVO.
Gruß Maik
RV
30 December 2025 00:0530.12.2025 00:05
Just a silly question:
Is this the case for both V8 Pro and Rescue?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Mal eine blöde Frage:
ist das sowohl bei V8 Pro als auch Rescue so?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Maik1702
30 December 2025 11:0630.12.2025 11:06
Yes, it worked once with V8 Pro, but the second time it blinked red/blue again and no longer connected.
When I flash the V8 via USB, it blinks white and stays that way.
It will turn green at V7.
Edited 1 time(s). Last edit at 12/30/2025 12:23PM by Maik1702.
Ja, einmal ging es mit V8 Pro, beim 2. mal blinkt es wieder rot/blau und connected nicht mehr.
wenn ich die V8 per USB aufspiele, blinkt es weiß und bleibt auch so.
bei V7 wird es grün
Edited 1 time(s). Last edit at 12/30/2025 12:23PM by Maik1702.
RV
30 December 2025 18:2030.12.2025 18:20
So - Eddi needs to take a look at this in the service department; from a distance, everything looks fine.
Please create a service case for this stabilizer.
To do this, log in to vstabi.info and navigate to your device list (bottom left). Click on the service icon next to the relevant device.
Please fill out the form (first contact details, then a description of the problem). You can also attach images, logs, etc. If it's a warranty claim, please upload your purchase invoice.
After submitting the form, a confirmation email will be sent automatically.
Our service will then contact you via email as soon as possible.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Also - das muss sich Eddi im Service mal ansehen, aus der Ferne ist erstmal alles gut.
Bitte lege für diese Stabi einen Servicefall an.
Logge Dich dazu auf vstabi.info ein und navigiere zu Deiner Geräteliste (links unten). Klicke auf das Service Icon beim betreffenden Gerät.
Das Formular (Zuerst Kontaktdaten, im 2. Schritt Fehlerbeschreibung) bitte ausfüllen. Hier kann man auch Bilder, Logs o.Ä. anhängen. Im Falle einer Gewährleistungsanfrage bitte die Kaufrechnung mit hochladen.
Nach Absenden des Formulars wird automatisch eine Bestätigungsmail versandt.
Unser Service nimmt dann so bald wie möglich per Mail Kontakt auf.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.