Vinger
16 March 2016 07:5216.03.2016 07:52
Trying to set up an aircraft with two aileron servos, two flap servos, single elevator and rudder servos. According to
http://www.vstabi.info/en/node/1797 there are extra signals on RX A that can be used in macrocell setup. Will this work for the setup mentioned or do I need a full size or Neo?
VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter
RV
16 March 2016 09:2316.03.2016 09:23
Yes - this works. The 2 flaps are connected to RXA - the rest is a standard VPlane setup ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Vinger
16 March 2016 09:5116.03.2016 09:51
Thanks will experiment further.
VControl, VBar on all.
TDR, TDR2, TDF, TDS and TDSF
Peter