Simon_75
31 January 2026 20:1331.01.2026 20:13
Hi
I have a Goblin 570 with a Vstabi Mini, two satellites and a Spektrum DX7. I now wanted to put the new Hobbywing 150A V5.1 into operation.
A new Vbar Touch transmitter with Evo has been ordered and is on its way. Nevertheless, I wanted to test my setup, but unfortunately the motor (Skorpion 4025 1100) isn't running.
Should I leave the hardware settings at their defaults and activate GOV in vstabi, or should I set it to external GoV in the hardware settings? Perhaps someone can give me some advice.
Thank you
Best regards, Simon
Hy
Ich habe einen Goblin 570 mit mit Vstabi Mini, zwei Satelliten und Spektrum DX7. Ich wollte nun den neuen Hobbywing 150A V5.1 in Betrieb nehmen.
Neuer Sender Vbar touch mit Evo ist bestellt und unterwegs. Trotzdem wollte ich mein setup testen, leider läuft der Motor nicht (Skorpion 4025 1100).
Muss ich beim HW die Standardeinstellungen lassen und GOV im vstabi aktivieren oder im HW auf externer Gov einstellen? Vielleicht kann mir jemand einen Rat geben.
Vielen Dank
LG Simon
RV
31 January 2026 20:2331.01.2026 20:23
Hi Simon,
It's so old that we no longer support either the VBar Mini or its connections.
But... here in shorthand - from memory... no guarantee as it was too long ago.
Requirements:
- RPM pulse correctly connected to Mini
- Motor switch implemented according to VBar specifications (Off-AR-On) -100 - 0 - +100
- Pitch range calibrated -100 / 0 / +100
- activate VGov in VBar
- Switch the ESC to VGov mode (to do this, activate direct stick input in the VBar Gov setup and adjust the settings) or teach in the throttle ranges.
Alternatively:
Wait for the VBC and EVO and do it with those. The above is a painful procedure from today's perspective... ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Hallo Simon,
das ist schon so alt dass wir weder die VStabi Mini noch die Anbindungen daran mehr supporten.
Aber ... hier in Steno - aus dem Kopf ... ohne Gewähr da zu lange her.
Voraussetzungen:
- RPM Puls an Mini richtig angeschlossen
- Motorschalter gem. VStabi Vorgabe implementiert (Aus-AR-An) -100 - 0 - +100
- Pitchweg kalibriert -100 / 0 / +100
- im VStabi VGov aktivieren
- ESC auf Mode für VGov umdaddeln (dazu im VStabi Gov Setup Knüppeldirekt aktivieren und daddeln) bzw. Gaswege einlernen
Alternativ:
Warte auf die VBC und EVO und machs damit. Das obige ist eine schmerzvolle Prozedur aus heutige Sicht ... ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Simon_75
31 January 2026 20:5331.01.2026 20:53
Hello Rainer
Thank you for the quick reply. I'd rather wait for the Touch and Evo versions.
Regards, Simon
Edited 1 time(s). Last edit at 01/31/2026 08:54PM by Simon_75.
Hallo Rainer
Vielen Dank für die schnelle Antwort. Da warte ich lieber auf die Touch und Evo
Lg Simon
Edited 1 time(s). Last edit at 01/31/2026 08:54PM by Simon_75.
RV
1 February 2026 09:4901.02.2026 09:49
Exactly.
And here's another tip for clarity regarding the order:
- Register and set up VBC, download the controller app and battery manager immediately
- Register and update EVO if necessary (via VBC)
- Connect the controller as a power source without telemetry
- Set up without controller setup
- Connect the controller fully
- Attach battery (it will then boot up automatically)
- In the model setup, select the controller mode at the very bottom.
- In the controller setup, you may only need to adjust the direction of rotation and BEC voltage.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Genau.
dazu dann noch ein Tip der Übersicht halber was die Reihenfolge anbelangt:
- VBC registrieren und einrichten, Reglerapp und Akkumanager gleich laden
- EVO registrieren und ggf. updaten (geht über VBC)
- Regler als Stromquelle verbinden ohne Telemetrie
- Setup machen ohne Reglersetup
- Regler vollständig anstecken
- Akku anlegen (kommt dann automatisch hoch)
- Im Modellsetup ganz unten dann jetzt den Reglermodus wählen
- Im Reglersetup ggf. nur Drehrichtung und BEC Spannung noch einstellen
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Simon_75
4 February 2026 16:3504.02.2026 16:35
Hello Rainer
Everything arrived, happy :-)
I will now install everything according to your advice and will get back to you when everything is working or if I have any further questions.
Best regards
Simon
Edited 1 time(s). Last edit at 02/06/2026 12:16PM by Simon_75.
Hallo Rainer
Alles angekommen, Freude herrscht :-)
Ich werde das ganze nun nach deinem Ratschlag installieren und melde mich wenn alles läuft oder sollte ich noch Fragen haben.
Liebe Grüsse
Simon
Edited 1 time(s). Last edit at 02/06/2026 12:16PM by Simon_75.
Simon_75
6 February 2026 12:3206.02.2026 12:32
Yesterday I installed everything according to your suggestion and did the first setup flight.
The helicopter sits perfectly in the air; only the tail oscillates slightly while hovering.
I have configured everything in the VBC, including the Vbar regulator and the gear ratio (Goblin 570) with two-stage gearbox:
Stage 1 (belt): Black pulley (60) ÷ Motor pinion (18) = 3.333 Stage 2 (gear): White main gear (62) ÷ Helical gear (18) = 3.444 Overall gear ratio: \(3.333\times 3.444=\mathbf{11.478}\)
Translation (Ratio): 11.48
Number of poles: 5 pairs, 10 poles
Mode: VBar controller mode (activated).
Do I need to calibrate the throttle position or do anything else additional?
I have routed the cable from the (Hobbywing 130A 5.1) to the ESC, the yellow cable to RPM, the cable with +|- to Aux 2, and the telemetry cable to Tel 1 (TEL 2 is backup). Is that correct?
Thanks for your support
Greetings from Switzerland
Simon
Ich habe gestern alles gemäß deinem Vorschlag installiert und den ersten Einstellflug gemacht.
Heli liegt perfekt in der Luft, einzig das Heck pendelt leicht beim Schweben.
Ich habe in der VBC alles eingestellt, Regler Vbar, Übersetzung (Goblin 570) mit Zweistufengetriebe:
Stufe 1 (Riemen): Schwarzes Riemenrad (60) ÷ Motorritzel (18) = 3,333Stufe 2 (Zahnrad): Weißes Hauptrad (62) ÷ Schrägmetallzahnrad (18) = 3,444Gesamtübersetzung: \(3,333\times 3,444=\mathbf{11,478}\)
Übersetzung (Ratio): 11,48
Polzahl: 5Paar 10Pol
Modus: VStabi Regler Modus (aktiviert).
Muss ich noch den Gasweg einlernen oder etwas anderes zusätzliches tun?
Ich habe das Kabel verlegt vom (Hobbywing 130A 5.1 beim ESC, das gelbe Kabel bei RPM und das Kabel mit +|- bei Aux 2 sowie das Telemetriekabel bei Tel 1/ (TEL 2 ist Backup.) ist das korrekt so?
Danke für deine Unterstützung
Lg aus der Schweiz
Simon
RV
6 February 2026 14:4406.02.2026 14:44
That was all.
Regarding the rear end - what size servo is installed?
How much gain?
What about more gain?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Das war alles.
Wegen des Hecks - Welche Servogröße ist denn drin?
Wieviel Gain?
Wie ist es mit mehr Gain?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Eddi E. aus G.
6 February 2026 14:5206.02.2026 14:52
Hi Simon,
If you are using VBar Control Touch or EVO and VBar EVO and controllers with telemetry, you don't need to adjust anything directly on the controller.
Simply select the controller mode during setup (or toggle it on or change settings later there or in the Hobbywing app if absolutely necessary).
Learning how to adjust throttle positions is so 90s :-)
The wiring doesn't seem too bad, considering the maiden flight was successful :-)
Or, seriously, it's fine.
One could further improve plug economy by removing the sockets (–/+)/0 from the 2-wire connector and implanting them into the RPM plug 0/0/~, then (–/+)/~.
—Eddi
Born to fly ...
forced to work.
Hallo Simon,
wenn Du VBar Control Touch oder EVO und VStabi EVO und Regler mit Telemetrie verwendest, musst Du genau gar nix am direkt Regler einstellen.
Einfach beim Setup den Reglermodus auswählen (oder später dort oder in der Hobbywing App in dem Fall umtoggeln bzw. dort Einstellungen ändern falls unbedingt nötig).
Gaswege einlernen ist so 90-er :-)
Die Verkabelung scheint nicht so verkehrt zu sein, wenn der Erstflug schon mal gelungen ist :-)
Oder Ernst beiseite, passt schon.
Man könnte noch Stecker-Ökonomie betreiben und die Buchsen (–/+)/0 aus dem 2-adrigen auspinnen, und in den Stecker 0/0/~ von RPM implantieren, dann (–/+)/~.
—Eddi
Born to fly ...
forced to work.
Simon_75
8 February 2026 20:4108.02.2026 20:41
I'm using the standard servos (Align DS 650 tail servos), sensitivity set to default. However, I noticed that the servos were running at 1000 RPM on the first flight. Today I did two flights with an 18-year-old battery (April 17, 2008) at 1600 RPM. The tail is stable. The new batteries arrive tomorrow, and I'll report back.
After 18 years, I've become completely engrossed in my hobby again…
Ich habe die normalen Servos (Heck DS 650 von Align), Empfindlichkeit auf Standard. Was ich jedoch gesehen habe, beim Erstflug war die Drehzahl auf 1000. Heute zwei Flüge mit 18 Jahrigem Akku (17.04.2008) und 1600 Umdrehungen. Heck ist stabil. Morgen kommen die neuen Akkus und ich werde wieder berichten.
Nach 18 Jahren hat mich das Hobby wieder voll gepackt…
RV
8 February 2026 21:1708.02.2026 21:17
Yay!!!!! :-) :-) :-) :-) :-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Juhuuuu!!!!! :-) :-) :-) :-) :-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.