Good morning,
I'm writing this here in the cafe because it's probably more of a general topic:
For the Sim Reflex XTR there will be an update that enables the VControl transmitter to connect wirelessly via WLAN / UDP (we discussed this topic in a related thread).
Mr. Kunde sent me a link to the beta version (which will take even longer to reach the final version) which I just tested with my VControl EVO+ - it worked immediately as a control unit.
There is conflicting information regarding compatibility - but here's what I'm talking about firsthand:
- Current version cannot do it
- Beta can do it - but it will still take some time until release.
So, a little patience for the reflex users among us.
Regards, Bernd
2012 Logo 600SE - Mini-VBar 5.3 Pro - 2013 Logo 600SX - VBar 5.3 Pro with MPX summed signal & Kontronik motors/controllers - 2026 Logo 200 - VBar Micro V8.x with V-Control Evo+ V8.x
I'm writing this here in the cafe because it's probably more of a general topic:
For the Sim Reflex XTR there will be an update that enables the VControl transmitter to connect wirelessly via WLAN / UDP (we discussed this topic in a related thread).
Mr. Kunde sent me a link to the beta version (which will take even longer to reach the final version) which I just tested with my VControl EVO+ - it worked immediately as a control unit.
There is conflicting information regarding compatibility - but here's what I'm talking about firsthand:
- Current version cannot do it
- Beta can do it - but it will still take some time until release.
So, a little patience for the reflex users among us.
Regards, Bernd
2012 Logo 600SE - Mini-VBar 5.3 Pro - 2013 Logo 600SX - VBar 5.3 Pro with MPX summed signal & Kontronik motors/controllers - 2026 Logo 200 - VBar Micro V8.x with V-Control Evo+ V8.x
Moin,
ich schreibs mal hier im Cafe weil es wohl eher allgemein ist:
Für den Sim Reflex XTR wird es ein Update geben mit dem die Verbindung des VControl-Senders über WLAN / UDP kabellos funktioniert ( das Thema hatten wir hier in Nachbarthema ) .
Herr Kunde schickte mir einen Link zur Beta ( die noch länger braucht zum Finale ) mit Der ich gerade Test mit meinem VControl EVO+ machte - das lief sofort als Steuergerät.
Es gibt zu Kompatibilität ja unterschiedliche Infos - aber aus erster Hand:
- Aktuelle Version kann es nicht
- Beta kann es - dauert aber noch bis zum Release
Also etwas Geduld für die Reflex-User unter uns.
Gruß Bernd
2012er Logo 600SE - Mini-VStabi 5.3 Pro- 2013er Logo 600SX - VStabi 5.3 Pro mit MPX Summensignal & Kontronik Motoren/Reglern - 2026er Logo 200 - VStabi Micro V8.x mit V-Control Evo+ V8.x
ich schreibs mal hier im Cafe weil es wohl eher allgemein ist:
Für den Sim Reflex XTR wird es ein Update geben mit dem die Verbindung des VControl-Senders über WLAN / UDP kabellos funktioniert ( das Thema hatten wir hier in Nachbarthema ) .
Herr Kunde schickte mir einen Link zur Beta ( die noch länger braucht zum Finale ) mit Der ich gerade Test mit meinem VControl EVO+ machte - das lief sofort als Steuergerät.
Es gibt zu Kompatibilität ja unterschiedliche Infos - aber aus erster Hand:
- Aktuelle Version kann es nicht
- Beta kann es - dauert aber noch bis zum Release
Also etwas Geduld für die Reflex-User unter uns.
Gruß Bernd
2012er Logo 600SE - Mini-VStabi 5.3 Pro- 2013er Logo 600SX - VStabi 5.3 Pro mit MPX Summensignal & Kontronik Motoren/Reglern - 2026er Logo 200 - VStabi Micro V8.x mit V-Control Evo+ V8.x
machine-translated from German · Show original