Rainer2019
28 October 2026 07:2328.10.2026 07:23
Hello,
Dirt (soil from the field) has entered the pitot tube; how and with what can I clean it?
greeting
Rainer
Hallo,
in das Pitot-Rohr ist Schmutz eingedrungen (Erde vom Feld), wie und mit was kann ich es reinigen?
Gruß
Rainer
Eddi E. aus G.
28 October 2026 09:2328.10.2026 09:23
Hi Rainer,
You do know that it's supposed to measure air pressure and not the penetration depth into the ground, right?
:-)
Sorry...
But there we have the key phrase: you should be able to blow it out with compressed air/high pressure (unplug everything, otherwise you might fry the electronics ^^). A colleague of mine who races Mini Z cars had a small (airbrush?) compressor and a kind of compressed air gun to blow all the lint etc. out of the chassis from the racetrack carpet; something like that could help here too.
However, if the particles are too large, ...
Otherwise, send me an email to service (at) mikado-heli (dot) de, and we'll look for a new one.
Grüßle
Eddi
Born to fly ...
forced to work.
Moin Rainer,
Du weißt schon, dass das Luftdruck messen soll und nicht die Eindringtiefe in den Erdboden?
:-)
Sorry ...
Aber da haben wir schon das Stichwort, mit Luftdruck/Hochdruck sollte man es ausblasen können (alles abstecken, sonst platzt Dir womöglich die Elektronik ^^). Ein Kollege beim Mini Z racen hatte einen kleinen (Airbrush?) Kompressor und ne Art Druckluft-Pistole, um die ganzen Fusseln etc. vom Rennbahn-Teppich aus den Chassis zu pusten, sowas könnte hier auch helfen.
Wenn die Partikel allerdings zu groß sind, ...
Sonst schreib mir 'ne Mail an service (at) mikado-heli (punkt) de, und wir schauen nach einem neuen.
Grüßle
Eddi
Born to fly ...
forced to work.
Rainer2019
28 October 2026 14:0828.10.2026 14:08
Hi Eddi,
thanks for the quick reply!
A friend of mine has that too. I'll give it a try.
I'll get back to you then.
greeting
Rainer
Hallo Eddi,
danke für die schnelle Antwort!
Ein Bekannter von mir hat das auch. Dann werde ich mal mein Glück versuchen.
Ich melde mich dann wieder bei Dir.
Gruß
Rainer
Rainer2019
31 October 2026 12:0431.10.2026 12:04
Hi Eddi,
I have now blown out the pitot tube with compressed air.
It is now displaying the speed changes again.
I'll see how the altitude changes on the next flight.
greeting
Rainer
Hallo Eddi,
ich habe das Pitot-Rohr jetzt mit Druckluft ausgeblasen.
Die Geschwindigkeitsänderungen zeigt es jetzt wieder an.
Wie es mit der Höhenänderung aussieht, das werde ich beim nächsten Flug sehen.
Gruß
Rainer
Eddi E. aus G.
2 November 2026 09:1302.11.2026 09:13
Hi Rainer,
The electronics measure the height themselves, so that should be OK – if it's OK.
The pitot tube measures the pressure at the tip (0 at 0 velocity) and the general pressure; these pressures are then transmitted via the hoses to the sensors.
Grüßle
Eddi
Born to fly ...
forced to work.
Hi Rainer,
Höhe misst die Elektronik selbst, das sollte – wenn die OK ist – OK sein.
Das Pitot-Rohr erfasst den Druck auf der Spitze (0 bei 0 Geschwindigkeit) und den allgemeinen Druck, die Drücke stehen dann über die Schläuche auf den Sensoren an.
Grüßle
Eddi
Born to fly ...
forced to work.