Hey everyone,
I'm completely stuck and can't find it in either the forum or the instructions:
I would like to temporarily use my VBAR EVO as a pure RX without a gyro to control another FBL.
The VBC EVO is loaded
- VBAR Evo Basic Setup
- VBAR Evo Pro additional setup (cannot be deactivated)
- VBASIC (RX without receiver)
Pro Rescue is loaded in the VBAR EVO
When creating a new model, only helicopters are suggested to me, and the gyros are always active.
Even when I load VBAR Plane, I can only create new models of helicopters with gyroscopic capabilities.
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
Edited once. Last edited on 15.03.2025 at 17:16 by JMalberg.
I'm completely stuck and can't find it in either the forum or the instructions:
I would like to temporarily use my VBAR EVO as a pure RX without a gyro to control another FBL.
The VBC EVO is loaded
- VBAR Evo Basic Setup
- VBAR Evo Pro additional setup (cannot be deactivated)
- VBASIC (RX without receiver)
Pro Rescue is loaded in the VBAR EVO
When creating a new model, only helicopters are suggested to me, and the gyros are always active.
Even when I load VBAR Plane, I can only create new models of helicopters with gyroscopic capabilities.
Regards, Jürgen
(Here are the missing commas for free use in my posts: ,,,,,,,,, )
Edited once. Last edited on 15.03.2025 at 17:16 by JMalberg.
Moin Leute,
ich stehe auf dem Schlauch und finde es weder im Forum noch in der Anleitung:
Ich möchte mein VBAR EVO vorübergehend als purer RX ohne Gyro benutzen, um ein anderes FBL anzusteuern.
In der VBC EVO ist geladen
- VBAR Evo Basis Setup
- VBAR Evo Pro Zusatz Setup (lässt sich auch nicht mehr deaktivieren)
- VBASIC (RX ohne Empfänger)
In der VBAR EVO ist Pro Rescue geladen
Beim Anlegen eines neuen Modells werden mir nur Helis vorgeschlagen und die Gyro sind immer aktiv.
Auch wenn ich VBAR Plane lade kann ich nur Helis mit Gyro als neues Modell anlegen
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )
1 mal bearbeitet. Zuletzt am 15.03.2025 17:16 von JMalberg.
ich stehe auf dem Schlauch und finde es weder im Forum noch in der Anleitung:
Ich möchte mein VBAR EVO vorübergehend als purer RX ohne Gyro benutzen, um ein anderes FBL anzusteuern.
In der VBC EVO ist geladen
- VBAR Evo Basis Setup
- VBAR Evo Pro Zusatz Setup (lässt sich auch nicht mehr deaktivieren)
- VBASIC (RX ohne Empfänger)
In der VBAR EVO ist Pro Rescue geladen
Beim Anlegen eines neuen Modells werden mir nur Helis vorgeschlagen und die Gyro sind immer aktiv.
Auch wenn ich VBAR Plane lade kann ich nur Helis mit Gyro als neues Modell anlegen
Gruß Jürgen
( hier noch die fehlenden Kommata zu freien Verwendung in meinen Beiträgen: ,,,,,,,,, )
1 mal bearbeitet. Zuletzt am 15.03.2025 17:16 von JMalberg.
machine-translated from German · Show original