← VPlane / VBasic VLink

Stabilization in the surface model translated

VBar › VPlane / VBasic VLink · Started by Matze2510 on 20 October 2025 09:5320.10.2025 09:53
Matze2510 20 October 2025 09:5320.10.2025 09:53
Hello everyone here,

I'm the new owner of a VBAR Controls Touch. I've only ever used Jeti remote controls before.

Therefore, I have a question about stabilization in surface models.


For example, if I activate a model with lateral, vertical and horizontal control, will stabilization be automatically activated in bank two, or do I have to unlock it first?

Is there a video about this?

Or can someone send me some information on this?

Thank you

Matthias
machine-translated from German · Show original
Eddi E. aus G. 21 October 2025 09:3821.10.2025 09:38
Hi Matthias,

Stabilization = Sensitivity > 0.

Bank 1 does not have stabilization by default (but this can be done later), while banks 2 and 3 do.
But you don't really need to worry about it; everything is perfectly flyable.

The thing with Bank 1 can save airplane lives... there was also the jet pilot who, after assembly and test flight, had made further modifications and installed the VBar rotated by 180° without changing the setup accordingly... meaning the stabilization was working in the wrong direction.
He brought the model back unsteadily over a circuit (since the stabilization only works around the rudder deflection, not absolutely).

But if he had thought of Bank 1, everything would have been easy ^^ :-)

—Eddi

Born to fly ...
forced to work.



Edited once. Last edited on 21.10.2025 at 09:39 by Eddi E. from G.
machine-translated from German · Show original
Matze2510 22 October 2025 23:1922.10.2025 23:19
Thank you for your information.
machine-translated from German · Show original
VStabi VStabi Pioneer of Flybarless