k.h.o.heli
21 March 2026 14:0921.03.2026 14:09
Hello everyone,
In the "Area Mixer Setup" menu, I entered all the required values for CH01 Altitude; the deflections and directions are correct. However, when I exit the menu, the HR deflection changes.
How can that be?
Regards, Kurt
Hallo Zusammen,
ich habe im Menü "Flächenmischer Setup" CH01 Höhe alle erforderlichen Werte eingegeben, Ausschläge und Richtungen sind in Ordnung. Wenn ich nun das Menü verlasse ändert sich der Ausschlag des HR.
Wie kann das sein?
Gruß Kurt
ulrich
21 March 2026 18:4821.03.2026 18:48
That's probably the trim setting. Try deleting the trim values.
So long... Uli
http://www.vstabi.de
Das wird vermutlich die Trimmung sein. Lösch mal die Trimmwerte.
so long ... Uli
http://www.vstabi.de
k.h.o.heli
23 March 2026 18:5623.03.2026 18:56
Hi Uli,
I've already tried a few things, what's the correct way to proceed?
Background: the VBar NEO was in use in the helicopter; now I would like to...
I can use NEO in the surface model - new update and of course new
Setup: What do I need to consider?
Regards, Kurt
Hallo Uli,
hab schon einiges probiert, wie muss ich da richtiger Weise vorgehen.
Zur Vorgeschiche, das VStabi NEO war im Heli im Einsatz, jetzt möchte
ich das NEO im Flächenmodell einsetzen - neues Update und natürlich neues
SetUp. Was muss ich beachten?
Gruß Kurt
RV
23 March 2026 22:1323.03.2026 22:13
In the setup menu, the full deflection is set. In flight mode, the value is linked to the maneuverability. Just like in a helicopter ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
Im Setup wird der volle Ausschlag eingestellt. Im Flugmodus ist der Wert an die Wendigkeiten gekoppelt. Wie im Heli eben auch ;-)
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
k.h.o.heli
26 March 2026 10:3326.03.2026 10:33
Thank you for the quick information.
Regards, Kurt
Danke für die schnelle Information
Gruß Kurt