fjmoradiellos
14 October 2019 20:4614.10.2019 20:46
Hello,
I've had two failsafe on the same heli with two different vbar neos. Ive changed the antenna location and mounting. I'm at a loss any help will be greatly appreciated. I've included the logs from the two separate flights.
13.10.2019 13:57:14;VStabi Start -- BLACK NITRO
13.10.2019 13:57:15 Good;Reset Reason: Power On
13.10.2019 13:57:16 Info;Bank 1 Loaded
13.10.2019 13:57:16 Info;Bank 2 Loaded
13.10.2019 13:57:16 Info;Governor Stop
13.10.2019 13:57:16 Info;Governor in Motortune Mode
13.10.2019 13:57:16 Good;Motorswitch Motor Off
13.10.2019 13:57:17 Good;Motorswitch Idle Bailout
13.10.2019 13:57:19 Info;Calibration Finished
13.10.2019 14:00:16 Good;Motorswitch Idle Bailout
13.10.2019 14:01:47 Good;Motorswitch Motor On
13.10.2019 14:01:47 Warn;Low RPM: 756 RPM
13.10.2019 14:01:53 Warn;Low RPM: 902 RPM
13.10.2019 14:02:00 Warn;Low RPM: 853 RPM
13.10.2019 14:02:06 Warn;Low RPM: 788 RPM
13.10.2019 14:02:12 Warn;Low RPM: 787 RPM
13.10.2019 14:02:18 Warn;Low RPM: 926 RPM
13.10.2019 14:02:23 Info;Bank 2 Loaded
13.10.2019 14:02:23 Info;Governor Active
13.10.2019 14:02:29 Warn;Low RPM: 1107 RPM
13.10.2019 14:02:31 Info;Raised Vibration Level
13.10.2019 14:02:36 Warn;RC Input Packets lost
13.10.2019 14:02:37 Error;RC Failsafe activated
13.10.2019 14:02:41 Warn;RC Input Packets lost
13.10.2019 14:02:41 Error;RC Failsafe activated
13.10.2019 14:02:42 Info;Governor Idle
13.10.2019 14:02:42 Good;Motorswitch Idle Bailout
13.10.2019 14:02:42 Warn;High Vibration Level
13.10.2019 14:02:44;VBar Logfile End -- 13.10.2019 -- 14:02:44
and
27.09.2019 09:48:27;VStabi Start -- BLACK NITRO
27.09.2019 09:48:29 Good;Reset Reason: Power On
27.09.2019 09:48:29 Info;Bank 1 Loaded
27.09.2019 09:48:29 Info;Bank 2 Loaded
27.09.2019 09:48:30 Info;Governor Stop
27.09.2019 09:48:30 Info;Governor in Motortune Mode
27.09.2019 09:48:30 Good;Motorswitch Motor Off
27.09.2019 09:48:30 Good;Motorswitch Idle Bailout
27.09.2019 09:48:31 Info;Calibration Finished
27.09.2019 09:48:31 Warn;Low RPM: 0 RPM
27.09.2019 09:48:38 Warn;Low RPM: 0 RPM
27.09.2019 09:48:44 Warn;Low RPM: 0 RPM
27.09.2019 09:48:50 Warn;Low RPM: 0 RPM
27.09.2019 09:48:54 Warn;RC Input Packets lost
27.09.2019 09:48:56 Warn;Low RPM: 0 RPM
27.09.2019 09:49:03 Warn;Low RPM: 0 RPM
27.09.2019 09:49:09 Warn;Low RPM: 0 RPM
27.09.2019 09:49:15 Warn;Low RPM: 0 RPM
27.09.2019 09:49:21 Warn;Low RPM: 0 RPM
27.09.2019 09:49:27 Warn;Low RPM: 0 RPM
27.09.2019 09:49:34 Warn;Low RPM: 0 RPM
27.09.2019 09:49:40 Warn;Low RPM: 0 RPM
27.09.2019 09:49:46 Warn;Low RPM: 0 RPM
27.09.2019 09:49:52 Warn;Low RPM: 0 RPM
27.09.2019 09:49:58 Warn;Low RPM: 0 RPM
27.09.2019 09:50:05 Warn;Low RPM: 0 RPM
27.09.2019 09:50:08 Good;Motorswitch Motor On
27.09.2019 09:50:11 Warn;Low RPM: 0 RPM
27.09.2019 09:50:15 Good;Motorswitch Motor Off
27.09.2019 09:50:15 Good;Motorswitch Idle Bailout
27.09.2019 09:50:17 Warn;Low RPM: 0 RPM
27.09.2019 09:50:23 Warn;Low RPM: 613 RPM
27.09.2019 09:50:29 Warn;Low RPM: 938 RPM
27.09.2019 09:50:36 Warn;Low RPM: 874 RPM
27.09.2019 09:50:42 Warn;Low RPM: 870 RPM
27.09.2019 09:50:44 Good;Motorswitch Idle Bailout
27.09.2019 09:50:45 Good;Motorswitch Motor On
27.09.2019 09:50:48 Warn;Low RPM: 915 RPM
27.09.2019 09:50:54 Warn;Low RPM: 796 RPM
27.09.2019 09:51:00 Warn;Low RPM: 784 RPM
27.09.2019 09:51:07 Warn;Low RPM: 818 RPM
27.09.2019 09:51:13 Warn;Low RPM: 767 RPM
27.09.2019 09:51:19 Warn;Low RPM: 757 RPM
27.09.2019 09:51:25 Warn;Low RPM: 826 RPM
27.09.2019 09:51:31 Warn;Low RPM: 861 RPM
27.09.2019 09:51:38 Warn;Low RPM: 937 RPM
27.09.2019 09:51:42 Info;Bank 2 Loaded
27.09.2019 09:51:42 Info;Raised Vibration Level
27.09.2019 09:51:42 Info;Governor Active
27.09.2019 09:51:51 Info;Raised Vibration Level
27.09.2019 09:51:59 Warn;RC Input Packets lost
27.09.2019 09:52:00 Warn;RC Input Packets lost
27.09.2019 09:52:06;VBar Logfile End -- 27.09.2019 -- 09:52:06
Any advice would be greatly appreciated. I'm just at total lost for words and i can't not understand for the life of me why this is happening on the same heli with two separate control units.
1 mal bearbeitet. Zuletzt am 14.10.2019 20:50 von RV.
RV
14 October 2019 20:5214.10.2019 20:52
Well - was it the same heli?
If yes - does this heli have a belt drive?
How were the antennas / NEO placed?
Is there a photo available?
How was the result of a range ckeck (bar status)?
How is it now?
Before powering on the NEO again - could you please read the logs from the NEO with a PC first (get all entries) - maybe we'll find some hints there too.
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
1 mal bearbeitet. Zuletzt am 14.10.2019 20:58 von RV.
fjmoradiellos
14 October 2019 21:1214.10.2019 21:12
The helicopter is a Black Nitro 700,
Antennas in two different ways. One on down each side of the boom and the other is sticking out of the top of the frame in the back.
fjmoradiellos
15 October 2019 04:0115.10.2019 04:01
here is the log from the computer
Mon Oct 14 21:55:21 EDT 2019
Serial: 20017093
Firmware: 6.3
Patchlevel: 61
---- start ----
Warn 0:01 RC Input Packet lost
Critical 0:01 RC Failsafe has been activated
Info 0:02 Bank 1 Loaded
Warn 0:02 RC Input Packet lost
Info 0:02 Governor OFF
------------??---------------
Info 0:02 Motor Switch operated to OFF
Warn 0:03 RC Input Packet lost
Critical 0:00 Warmstart
Info 0:00 Bank 2 Loaded
Warn 0:00 RC Input Packet lost
Critical 0:00 IMU does not deliver any data anymore
Info 0:00 Governor OFF
------------??---------------
Info 0:00 Motor Switch operated to OFF
Info 0:00 Motor Switch operated to Idle bailout
Info 0:01 Bank 1 Loaded
Warn 0:01 RC Input Packet lost
------------??---------------
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
Info 0:00 Governor OFF
------------??---------------
Info 0:00 Motor Switch operated to OFF
Info 0:00 Motor Switch operated to Idle bailout
Info 0:01 Bank 1 Loaded
------------??---------------
OK 0:11 Good Health Message (10sec)
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
------------??---------------
Info 0:00 Motor Switch operated to Idle bailout
Info 0:01 Bank 1 Loaded
Info 0:01 Governor OFF
------------??---------------
Info 0:01 Motor Switch operated to OFF
OK 0:11 Good Health Message (10sec)
Info 0:13 Calibration Finished
Warn 0:18 RC Input Packet lost
Warn 0:19 RC Input Packet lost
Critical 0:19 RC Failsafe has been activated
Warn 0:20 RC Input Packet lost
Warn 0:21 RC Input Packet lost
Warn 0:22 RC Input Packet lost
Warn 0:23 RC Input Packet lost
Critical 0:23 RC Failsafe has been activated
Warn 0:24 RC Input Packet lost
Warn 0:25 RC Input Packet lost
Warn 0:26 RC Input Packet lost
Critical 0:26 RC Failsafe has been activated
Warn 0:27 RC Input Packet lost
Critical 0:27 RC Failsafe has been activated
Warn 0:28 RC Input Packet lost
Warn 0:29 RC Input Packet lost
Warn 0:30 RC Input Packet lost
Critical 0:30 RC Failsafe has been activated
Warn 0:31 RC Input Packet lost
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
------------??---------------
Info 0:00 Motor Switch operated to Idle bailout
Info 0:01 Bank 1 Loaded
Info 0:01 Governor OFF
------------??---------------
Info 0:01 Motor Switch operated to OFF
Info 0:06 Calibration Finished
OK 0:16 Good Health Message (10sec)
OK 0:26 Good Health Message (10sec)
OK 0:36 Good Health Message (10sec)
Warn 0:43 RC Input Packet lost
Critical 0:43 RC Failsafe has been activated
Warn 0:44 RC Input Packet lost
Warn 0:45 RC Input Packet lost
Critical 0:45 RC Failsafe has been activated
Warn 0:46 RC Input Packet lost
Critical 0:46 RC Failsafe has been activated
Warn 0:47 RC Input Packet lost
Warn 0:48 RC Input Packet lost
Warn 0:49 RC Input Packet lost
Critical 0:49 RC Failsafe has been activated
Warn 0:50 RC Input Packet lost
Critical 0:50 RC Failsafe has been activated
Warn 0:51 RC Input Packet lost
Warn 0:52 RC Input Packet lost
Critical 0:52 RC Failsafe has been activated
Warn 0:53 RC Input Packet lost
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
------------??---------------
Info 0:00 Motor Switch operated to Idle bailout
Info 0:06 Bank 1 Loaded
Info 0:06 Governor OFF
------------??---------------
Info 0:06 Motor Switch operated to OFF
Info 0:07 Calibration Finished
OK 0:17 Good Health Message (10sec)
OK 0:27 Good Health Message (10sec)
OK 0:37 Good Health Message (10sec)
OK 0:47 Good Health Message (10sec)
OK 0:57 Good Health Message (10sec)
OK 1:07 Good Health Message (10sec)
OK 1:17 Good Health Message (10sec)
OK 1:27 Good Health Message (10sec)
OK 1:37 Good Health Message (10sec)
OK 1:47 Good Health Message (10sec)
OK 1:57 Good Health Message (10sec)
OK 2:07 Good Health Message (10sec)
OK 2:17 Good Health Message (10sec)
OK 2:27 Good Health Message (10sec)
OK 2:37 Good Health Message (10sec)
OK 2:47 Good Health Message (10sec)
OK 2:57 Good Health Message (10sec)
OK 3:07 Good Health Message (10sec)
OK 3:17 Good Health Message (10sec)
OK 3:27 Good Health Message (10sec)
OK 3:37 Good Health Message (10sec)
OK 3:47 Good Health Message (10sec)
OK 3:57 Good Health Message (10sec)
Warn 4:05 RC Input Packet lost
Warn 4:08 RC Input Packet lost
Warn 4:09 RC Input Packet lost
Warn 4:12 RC Input Packet lost
Warn 4:14 RC Input Packet lost
Critical 4:14 RC Failsafe has been activated
Warn 4:15 RC Input Packet lost
Warn 4:16 RC Input Packet lost
Warn 4:17 RC Input Packet lost
Critical 4:17 RC Failsafe has been activated
Warn 4:18 RC Input Packet lost
Warn 4:19 RC Input Packet lost
Warn 4:20 RC Input Packet lost
Critical 4:20 RC Failsafe has been activated
Warn 4:21 RC Input Packet lost
Critical 4:21 RC Failsafe has been activated
Warn 4:22 RC Input Packet lost
Critical 4:22 RC Failsafe has been activated
Warn 4:23 RC Input Packet lost
Warn 4:24 RC Input Packet lost
Warn 4:25 RC Input Packet lost
Critical 4:25 RC Failsafe has been activated
Warn 4:26 RC Input Packet lost
Critical 4:26 RC Failsafe has been activated
Warn 4:27 RC Input Packet lost
Critical 4:27 RC Failsafe has been activated
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
Info 0:00 Governor OFF
------------??---------------
Info 0:00 Motor Switch operated to OFF
Info 0:00 Motor Switch operated to Idle bailout
Info 0:01 Bank 1 Loaded
------------??---------------
Warn 0:02 Init Failed, retrying...
Info 0:06 Calibration Finished
Warn 0:07 RC Input Packet lost
Warn 0:08 RC Input Packet lost
Critical 0:08 RC Failsafe has been activated
Warn 0:09 RC Input Packet lost
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
------------??---------------
Info 0:00 Motor Switch operated to Idle bailout
Info 0:02 Bank 1 Loaded
Info 0:02 Governor OFF
------------??---------------
Info 0:02 Motor Switch operated to OFF
Info 0:05 Calibration Finished
OK 0:15 Good Health Message (10sec)
OK 0:25 Good Health Message (10sec)
OK 0:35 Good Health Message (10sec)
OK 0:45 Good Health Message (10sec)
Warn 0:47 RC Input Packet lost
Critical 0:47 RC Failsafe has been activated
Warn 0:48 RC Input Packet lost
Critical 0:48 RC Failsafe has been activated
Warn 0:49 RC Input Packet lost
Critical 0:49 RC Failsafe has been activated
Warn 0:50 RC Input Packet lost
Critical 0:50 RC Failsafe has been activated
Warn 0:51 RC Input Packet lost
Warn 0:52 RC Input Packet lost
Critical 0:52 RC Failsafe has been activated
Warn 0:53 RC Input Packet lost
Critical 0:53 RC Failsafe has been activated
Warn 0:54 RC Input Packet lost
Warn 0:55 RC Input Packet lost
Critical 0:55 RC Failsafe has been activated
Warn 0:56 RC Input Packet lost
Warn 0:57 RC Input Packet lost
Critical 0:57 RC Failsafe has been activated
Warn 0:58 RC Input Packet lost
Warn 0:59 RC Input Packet lost
Critical 0:59 RC Failsafe has been activated
Warn 1:00 RC Input Packet lost
Critical 1:00 RC Failsafe has been activated
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
------------??---------------
Info 0:00 Motor Switch operated to Idle bailout
Info 0:02 Bank 1 Loaded
Info 0:02 Governor OFF
------------??---------------
Info 0:02 Motor Switch operated to OFF
Info 0:05 Calibration Finished
OK 0:15 Good Health Message (10sec)
OK 0:25 Good Health Message (10sec)
OK 0:35 Good Health Message (10sec)
OK 0:45 Good Health Message (10sec)
OK 0:55 Good Health Message (10sec)
OK 1:05 Good Health Message (10sec)
OK 1:15 Good Health Message (10sec)
OK 1:25 Good Health Message (10sec)
OK 1:35 Good Health Message (10sec)
Warn 1:43 RC Input Packet lost
Warn 1:44 RC Input Packet lost
Warn 1:45 RC Input Packet lost
Warn 1:46 RC Input Packet lost
Warn 1:47 RC Input Packet lost
Critical 1:47 RC Failsafe has been activated
Warn 1:48 RC Input Packet lost
Critical 1:48 RC Failsafe has been activated
Warn 1:49 RC Input Packet lost
Critical 1:49 RC Failsafe has been activated
Warn 1:50 RC Input Packet lost
Warn 1:51 RC Input Packet lost
Critical 1:51 RC Failsafe has been activated
Warn 1:52 RC Input Packet lost
Warn 1:53 RC Input Packet lost
Critical 1:53 RC Failsafe has been activated
Warn 1:54 RC Input Packet lost
Critical 1:54 RC Failsafe has been activated
Warn 1:55 RC Input Packet lost
Critical 1:55 RC Failsafe has been activated
Warn 1:56 RC Input Packet lost
Warn 1:57 RC Input Packet lost
Critical 1:57 RC Failsafe has been activated
Warn 1:58 RC Input Packet lost
Warn 1:59 RC Input Packet lost
Critical 1:59 RC Failsafe has been activated
Warn 2:00 RC Input Packet lost
Warn 2:01 RC Input Packet lost
Critical 2:01 RC Failsafe has been activated
Warn 2:02 RC Input Packet lost
Warn 2:03 RC Input Packet lost
Critical 2:03 RC Failsafe has been activated
Warn 2:05 RC Input Packet lost
Critical 2:05 RC Failsafe has been activated
Warn 2:06 RC Input Packet lost
Warn 2:07 RC Input Packet lost
Critical 2:07 RC Failsafe has been activated
Warn 2:08 RC Input Packet lost
Warn 2:09 RC Input Packet lost
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
------------??---------------
Info 0:00 Motor Switch operated to Idle bailout
Info 0:02 Bank 1 Loaded
Warn 0:02 Init Failed, retrying...
Info 0:02 Governor OFF
------------??---------------
Info 0:02 Motor Switch operated to OFF
Info 0:06 Calibration Finished
OK 0:16 Good Health Message (10sec)
Warn 0:26 RC Input Packet lost
Warn 0:27 RC Input Packet lost
Critical 0:27 RC Failsafe has been activated
Warn 0:28 RC Input Packet lost
Critical 0:28 RC Failsafe has been activated
Warn 0:34 RC Input Packet lost
Warn 0:35 RC Input Packet lost
Warn 0:36 RC Input Packet lost
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
------------??---------------
Info 0:00 Motor Switch operated to Idle bailout
Info 0:02 Bank 1 Loaded
Warn 0:02 Init Failed, retrying...
Info 0:02 Governor OFF
------------??---------------
Info 0:02 Motor Switch operated to OFF
Info 0:08 Calibration Finished
OK 0:18 Good Health Message (10sec)
OK 0:28 Good Health Message (10sec)
OK 0:38 Good Health Message (10sec)
OK 0:48 Good Health Message (10sec)
OK 0:58 Good Health Message (10sec)
OK 1:08 Good Health Message (10sec)
OK 1:18 Good Health Message (10sec)
OK 1:28 Good Health Message (10sec)
Warn 1:29 Reset Reason: Watchdog
Info 1:29 Bank 2 Loaded
------------??---------------
Info 1:29 Motor Switch operated to Idle bailout
Info 1:31 Bank 1 Loaded
Info 1:31 Governor OFF
------------??---------------
Info 1:31 Motor Switch operated to OFF
Info 1:39 Calibration Finished
OK 1:49 Good Health Message (10sec)
OK 1:59 Good Health Message (10sec)
OK 2:09 Good Health Message (10sec)
OK 2:19 Good Health Message (10sec)
OK 2:29 Good Health Message (10sec)
OK 2:39 Good Health Message (10sec)
OK 2:49 Good Health Message (10sec)
Warn 2:55 The Cyclic Ring is active
OK 3:05 Good Health Message (10sec)
OK 3:15 Good Health Message (10sec)
Warn 3:16 The Cyclic Ring is active
Warn 3:17 The Cyclic Ring is active
Warn 3:18 The Cyclic Ring is active
Warn 3:19 The Cyclic Ring is active
Warn 3:20 The Cyclic Ring is active
Warn 3:21 The Cyclic Ring is active
Warn 3:22 The Cyclic Ring is active
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
------------??---------------
Info 0:00 Motor Switch operated to Idle bailout
Info 0:01 Bank 1 Loaded
Info 0:01 Governor OFF
------------??---------------
Info 0:01 Motor Switch operated to OFF
Warn 0:02 Init Failed, retrying...
Info 0:08 Calibration Finished
OK 0:18 Good Health Message (10sec)
OK 0:28 Good Health Message (10sec)
OK 0:38 Good Health Message (10sec)
OK 0:48 Good Health Message (10sec)
OK 0:58 Good Health Message (10sec)
OK 1:08 Good Health Message (10sec)
OK 1:18 Good Health Message (10sec)
OK 1:28 Good Health Message (10sec)
OK 1:38 Good Health Message (10sec)
OK 1:48 Good Health Message (10sec)
OK 1:58 Good Health Message (10sec)
OK 2:08 Good Health Message (10sec)
OK 2:18 Good Health Message (10sec)
OK 2:28 Good Health Message (10sec)
OK 0:00 Reset Reason: Power On
Info 0:00 Bank 2 Loaded
------------??---------------
Info 0:00 Motor Switch operated to Idle bailout
Info 0:01 Bank 1 Loaded
Info 0:01 Governor OFF
------------??---------------
Info 0:01 Motor Switch operated to OFF
Info 0:05 Calibration Finished
OK 0:15 Good Health Message (10sec)
OK 0:25 Good Health Message (10sec)
OK 0:35 Good Health Message (10sec)
OK 0:45 Good Health Message (10sec)
OK 0:55 Good Health Message (10sec)
OK 1:05 Good Health Message (10sec)
OK 1:15 Good Health Message (10sec)
OK 1:25 Good Health Message (10sec)
OK 1:35 Good Health Message (10sec)
OK 1:45 Good Health Message (10sec)
---- end ----
RV
15 October 2019 08:2615.10.2019 08:26
Ohhh - there are lots of signal losses. So - how are the VBC bars now when performing a range check? - Could you please do so and attach images?
regards (EN) / Gruss (DE)
Rainer Vetter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Posting and answering - please use a PC and a standard keyboard. Answer all questions fully, take the needed time, don't forget probably requested attachments.
Für Posts und Antworten bitte einen PC und eine richtige Taststaur benutzen sowie alle Fragen vollständig abarbeiten. Nehmt Euch Zeit, beantwortet Rückfragen in Ruhe und vollständig.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Für Einzelkommunikation bitte ausschließlich Email verwenden! - PN, Messenger, Chat usw. werden nicht bearbeitet.
For single user communication please send a email only! PM, Messenger, Chat etc. won't be read.
fjmoradiellos
31 October 2019 19:1531.10.2019 19:15
this was right next to it.
fjmoradiellos
31 October 2019 19:2831.10.2019 19:28
this was outside my home. I live in concrete block home.
fjmoradiellos
31 October 2019 19:3131.10.2019 19:31
this is outside my house behind my vehicle. Be aware that all of this are taken with the heli inside my house.
Eddi E. aus G.
4 November 2019 13:4604.11.2019 13:46
Hi,
although the levels look OK (the second post is hard to read, blooming inverted display), I'd rather have that unit checked at our service shop.
Please create a service request at www.vstabi.info/devices, and we will see to it.
What's in the log is definitely not good :-/
I didn't have one of these aftermarket cases in my hand so far, so I'd appreciate it if you would send it along (leave everything the way it is, actually).
We will of course return it.
Kind regards
Eddi
Born to fly ...
forced to work.